The Jalopy Journal
Watch the hub contact, the hub must make contact the brake drum or the wheel will distort .
I use electrical tape and wrap it abound all the pulleys on the outside of the pullyes do not pull or stretch the tape . Then lay it out and...
Too much grip on the front. ie tire tread with and could be just one thing switch to a narrower tire and don't cut it.
Check your steering column joint it looks like it is biting (to much angle). Yes the Heim joint bore size may not be correct and that is where the...
Get rid of all the miss matched parts and start over. JMHO
I used a Mustang shifter on the floor of my Thirty Four . Remember KISS !!!!!!
Nice find!!!!!!! Roman Red that is the color of my 59 corvette.
That is one beautiful piece of art. Go bless your grandfather for keeping it so nice. Please see the generator mount it doesn't look like it is...
Cleaning out the shop. 300.00 OBO + S/H. All the parts are media blasted and painted all the adjusters move freely.
and the rear backing plate...
Hi I think the Electric fan will work fine. I was just theorizing about the centrifugal fan.
Give it a go.
Hey twostick maybe a fan with a fluid action that will only spin X amount of RPMs can be used . ???
Good decision using a electric fan for reliability .
You're talking about apples and oranges. NO
I milled my model A axle. I would never ruin a 32 wishbone.
I had three of them from up to one that can drill a 2" + holes automatically.
Hi I have a perfect set of 36 37 Ford spindles with new bushings and NOS king pins ready to be installed 225.00 + shipping. I also have a full set...
Have you tried other leavers ? Add some gaskets to he trans. case. JMHO
Take it apart clean it up and put it back together. Cut the threaded portions of the front u bolts. Check if the rear wheels have the same offset...
I have a Chevy pickup box that looks like that. See the area that attaches to the frame it has a bracket that the box is slid through.
Lowered price. 100.00
Please see your springs is there a different leaf on the passenger side . I don't think you can mix and match leaf springs One side looks like it...
Just slot the holes . Watch the clearance on the top , you may have to cut out the backing plate or grind the spindles. That is HOT RODING. It has...
See my ad it has most of what you need. Look up 35 36 backing plates.
Start with the Bat Wings and go from there . If they are different then your four bars will have to be worked on. The spring moves so easily...
Thanks Bill . It looks to be a good case with no wear on the front and rear cluster gear washer surfaces.
Thanks Jim. I looked at the chart and noted H10,569, 1936 Lincoln Zephyr V12 . Am I correct ?
Please help identify this case . See pictures[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] below. Thank you for your assistance. Jim T.
Maybe a Chrysler Industrial six cyl. ?
Separate names with a comma.