The Jalopy Journal
Id like to try an Eaton Tru Trac if I can afford it
I think its open.
Can you Identify if this is an open vs limited slip at a glance
Thank You[ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] not mine but i got theguys#
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Plus shipping
Lists as 600 CFM
Its been sitting so it could use a kit
Shipped to Lower 48 Via US Mail.
All threads good.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Thanks to everyone for the help. I mig welded the neck and added a gusset between the
upper and lower tubes, really thin stuff. If the frame...
I have a bicycle repair to make. Material is Hi Ten Steel about 1/16. Can this material be mig welded like mild. If not what are the procedures....
I like the 3 port filter method, but I already have a Holley 12-803 regulator, can I use the extra port as a return?
Simple question, What prep is necessary to re-coat with rustoleum over rustoleum after say 6 months?
( thinned with acetone)
I can lose a tool while Im still holding it
Thats why I have two of everything
Considering that or the 07192 with 60926 cartridge, but will probably go with the disposable and replace as necessary
I will shave and get a good respirator rated for the material used.
Separate names with a comma.