The Jalopy Journal
Maybe study up on valve to seat contact width if your not up on that
Don’t think there are any tricks to it, make sure the pilot fits into clean preferable new valve guides property. Put the cutter on , push down...
The limit is my wallet , I could build a high horse power engine but then I have to find the $ for the drivetrain. So I’m limiting the model A to...
Just google it if you need to..... of course I knew it was about Pontiac head bolts or I wouldn’t have looked
If you are only getting bubbles out of the front (?) you are sucking air somewhere in the front system, re tighten everything and see how you go.
Looks 100% normal
Where you at? Do you have access to 95 or 98 octane fuels?
My 5c , you need more compression with that cam and head. What carb and manifold?
Pro comp not so good , maybe the translation didn’t work. Perhaps some design issues, they will work at lower compression but there may be some...
‘56 Dodge , there are probably others , someone will be along shortly, so far I can’t find that code.
That does not look like a Dodge plate , looks home made. Doesn’t answer the question though.
What Mr Griffin said
Point was it might not be your springs.......
What shocks, what rear tyres and pressure?maybe a photo of the set up .....
Don’t think anything should match anything on anything but a Ford.
A quick google is all you need.
Ok.... direct injection uses injectors and one of them new fangled computer things. There are economy and performance advantages.
LPG using a...
E85 is ethanol, someone mentioned “alcohol” which is Methanol. Ethanol eats some things like rubber and plastic. As long as the parts and flex...
What is the idle speed? A higher stall could be fix not a bandaid ( depending on many things)
Might be wrong but I think your looking for a modern measurement. I don’t remember anyone doing @.050 in the time frame of the HAMB. You got “...
Just use a grease that’s designed for steering bix’s, seems like the thing to do
Different spelling but close, might be worth a call.
to be correct you should be on a valve set.
Photo of the grille? Not taking “his” side just interested to see how bad it is.
Don’t think the internet is traditional .
Cold start idle rpm is? Hot idle rpm is?
an answer to the first question, where is it mounted and could you move it back? Done any corner weighing?
Snyder’s or Brattons. Depending on what you want.
Too poor for a new wireless, most of my cars it’s only useful if I’m parked with engine off anyway.
Separate names with a comma.