The Jalopy Journal
Great Job!! Thanks for sharing.
You sure can! I did my '49 Chevy Seat Backs with great success. It dries to a crusty surface, so I lightly brushed it with a soft bristle brush....
Stock '49 Chevy Styleline Arm Rest. Faux painted woodgrain.
3M 90 applied to both surfaces.
Attach before it dries completely.
Steamer will reactivate glue if needed.
The substrate I use is Sintra brand....
Fronts have more of a radius. But if you don't have both to compare, it's tough to tell.
My 3100 I built a few years back. Ford repops on the fenders, and aftermarket marker lights in the bedroll.
My '49 (Blocked with 300 grit, and satin cleared)
Brother's UniBody (Blocked with 300 grit, and satin cleared)
My '50 3100 (Just the way Mother...
Don't touch it!
My Butt must be made of Bakelite, 'cause it Stinks!
Pic would help!
On my '49 Chevy the fasteners could be anything I wanted. The center brace clamps to windshield trim, and the ends...
Thank you so much! The car was very well received, and had a steady crowd at Mecum, but the market has definitely swung toward the restomod buyer...
I dropped the Reserve and the car sold for only $20,900. to a Dealer.
Immediately realized it was a Resto-Mod crowd by the 2nd day into the...
Excellent job on representing the Event! Even with the quality of cell phone photo technology, it still takes a great eye to take a good picture!...
Yep! That was my Build. I have a vacation home in Ormond Beach, Florida, so I figured it would get more action down there. Didn't draw what I...
Great Catch! That's exactly where the car is.
The Old Watch Factory is now mixed-use office/apartment/restaurants. Long overdue! Glad to see all...
Thanks for the clarification guys!
Can't get a State-required annual Inspection without one in Massachusetts!
And now the process is video'd!
I think you're talking about the Shed Roof? Yeah the contents are fantastic, but that high roof isn't doing much at all!
I've sold a lot of parts to Australia, New Zealand, and Dubai. No upcharge on my end, and I wasn't aware you guys were getting wacked with a Duty...
I sell them a Season after they are done! I don't hang on to anything. The fun for me is the challenge of the Build, then I'm bored and looking...
My '49 weeps a little at the same spot, and I have yet to find anyone that makes the gaskets.
(Spoke with filling station, sent them pictures,...
Beer Bottle Third Brake Light on my '50 Chevy.
I'm running the Standard Kit that many suppliers offer...
[ATTACH] [ATTACH] [ATTACH]
I opted for Subtle...
Mecum-Bound! The '49 was loaded today, and off to Kissimmee. It pays to go with a Premium Hauler, Terry the Driver was fantastic! We'll catch up...
Welcome! And best of luck with your new Ride!
Looks like a great Project. Be sure to keep us updated.
I like Santa's Sleigh!
Separate names with a comma.