The Jalopy Journal
I get so much more done when I have list. Been doing list for over 45 yrs. Works for Me 3x5 cards
[ATTACH] [ATTACH] [ATTACH]added some other pics, and a better inst cluster pic. Who says cleaning the shop is a chore. Found the electrical temp...
Your workmanship is awe inspiring. Beautiful.
Thanks for sharing.
Yes on the fan. Still looking for the crank pulley.
Must be 59a .didn't know any diff. I have 2:(
Thanks for the tip.
Well not the tomorrow I envisioned but progress. I have moved the 28 inside and have a better build space. Lots of work, and junk thrown away. Now...
How much longer? will this just be in the mount area?
Cliff I have a wide pulley off of a 59 a eng. Mike 28 a roadster on a model a frame.,
I am using the late Edelbrock heads.
Eng has no pumps at present.
In the roadster I'm building I have a 8cm eng with a crab dist. I need to know what w/p to order
.I'm pretty sure wide belt but don't know which...
Hope you are going with the later 1 piece guides and not tulip valves.
Moved the inside of the shop around .Now all is under cover. Have a bit more space to work on the 28.
Tomorrow the heads go on, as well as the...
With my limited knowledge of flat heads ,all of the up thru 48, 59 A had split guides.8ba,8cm, started in 49 with the single piece guide and...
Got the heads back from the shop after milling .050 .Looks perfect to me. Now to get them installed. Looks like a shadow on the rt side.
hrA come on down to Ga and help me. I can use all the help and inspiration I can get.
You get more done on your days off than I do full time. Looks good.
Never heard of the fellow pages. Looks like I might join the NSRA.
I have one of the phones ,but only use it to take pics.
Thanks all for the...
I can see the place on mine where the bolt, or rivet would have passed thru.
Picture is great OFT.
Looks Great Nick .Great inspiration.
Had to get the hammer out today. 105 heat index, 101 temp. Not much work done . Does this point get welded?
The engagement of the cowl to the subrails. It's about 1'' from being seated on the rails . Had to share the engagement. LOL
Thank you For some Heart felt advice. Thanks for taking the time to read. LOL.
Just came from the shop taking pics of stuff to sell. It's 99...
Finally got the bottom end bolted up. Heads should be ready this week.
Next water pumps, then intake.
[ATTACH] [ATTACH] [ATTACH]
Two folks, Friends ,that I have met on The HAMB. Bill Nabors and Owen Barns. Since I've met them all three of us are...
Thanks BCT, it's comments like yours and others that keep me plugging along.
Today 2 friends are coming over for a short visit. Right at 600...
In B'ham Al, it was a place called the Sky Castle in the 50s.
Great read, hope you are driving soon.
In 56 had a 3 w with a 32 grill.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
This is what I did yesterday. Today is rest day. Had the phone looked at today, cooking, washing and ironing....
Thanks Arron. I remember you saying this to me. Will just see how it goes. It will be up to the next owner if it comes apart again. Using bolts...
Separate names with a comma.