The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Hi , does anybody know what engine/Transmissin adapters are these?
I have them laying ariund forever...
I am from Germany and we made the deal, for sure.
Maybe i mixed it up with my closed drive 37 buick that i am useing at the moment
Hi Frank, the transmission is still waiting to be used.... but it was a,Hildebrandt adapter.
I have an open drive QC for it and a 35-36 rear end
What kind blower do you run? Eaton M ?
The spikes can be the problem with a generator , not the Voltage .
I would not have any worries with Stromberg parts
They stand behind their products
The 112 LSA may help a little , but i am still not sure it makes so little boost with the small 255ci engine
Your new cam must have less overlap to make more boost at low rpm than the L-100 cam .
Is this the case ?
I really dont think your problem is...
Wow, nice !!!!
New Product from them ?
You gonna chrome them ?
If you dont mind the question....how much are they?
I run a 304ci engine with 0.3 thousand and it doesnt detonate.....(yeah , tight... .4-.5 would be perfekt)
Proper timing ....
I bet ignition and...
Yeah i understand :)
I have a second hand set 4-71 . 12psi
Yep! , i agree
Hi Ron , i am still waiting for some cam spec details :)
Hmmmm , a lot of people seem to have problems making boost with the h&h blowers ...their pulleys should have a ratio to make boost at a certain...
What is a 2.3l blower?which car does
It come from?
Will you share the cam specs with us ?
How tall is the TR Design blower intake?
So you are swiching classes .
Very clever :)
Record is much lower than in the Roadster Class
Getting the coupe to 100mph is a challenge...
Found it , but i have apple/safari
So no help there
Cool,do you have the link to the thread?
What a good looking Hot Rod!!!
Damm , all of your build pics are gone....:(
Could you bring them up again,please?
What are the specs on the camshaft?
Hi Daniel ,do you know a source for a g28t engine for sale?
I like to build a 4-banger...
Very cool Hot Rod!!!!!
How much is it chopped?
Where did you buy the front brake hoses from?
1.5 valves are enough and dont relieve the block....
In my option a Max1 is wasted money.
The i would rather have a stock merc cam....
Any more technical details about the old channeld one?
Ok... the potvin 3/8 is too big. No torque below 2800 rpm (there it kicks in)
I would use an isky 1007b from Pete here on the Hamb .
And i would...
I really like that you really test that.
Cant wait to see the results.
In theory it should run better as it should breath better
Do you run Ross Pistons?
Mine where too long with that stroke.
I had to shorten them by 3/16.the skirts
Separate names with a comma.