The Jalopy Journal
I tried that route Wayne ,I have to take the more direct route down the drivers side.luckily there was 3 of those grommets in the Painless wiring...
sparks arrived for a few hours we went through the remaining wires out of the fusebox.anything we re not using was rolled up and put to the...
not really I painted everything black since day 1
with of course,they are too nice to leave off.
spent a few hours today making a bracket for the brake light switch.painted it ,fitted it and wired it the m5 screw were fiddly to get at.not too...
I used a 2003 VW golf mirror.non reflective black rear view mirror.quality item.cheap and plentiful what more could you want .e5
https://www.jegs.com/i/MSD-Ignition/121/8847/10002/-1 non logo.i used MSD holding up well with headers,MSD crimping tool works well with a vice
yellow /white wires switched over and motor bolted back in ,hopefully for good.
yellow and white are mixed up ,it could happen to the pope.easily fixed ill wrap it up next time around.
coolant recovery is on my list so ill be watching what you do.!
[ATTACH] TODAYS PROGRESS.i turned the wires exiting the wiper motor through 180* and used eyelet connections instead of the spade connectors that...
like it,what exactly is it
today detailed the column replaced the worn out grommet ,made and fitted some gaskets around the floor mount sanded the column and bolts ready...
change is as good as a rest,bulkhead fitting arrived in the post so fitted that.[ATTACH] [ATTACH] [ATTACH] locktited and lockwired.in the ideal...
moving on to the steering column and underdash area.had to pull the column to slide a reducer up the column to fit the dimmer/indicator switch.had...
whats the story with the tailgate catches any close up shots of those thanx
looks like a job for tb33anda3rd [IMG]
show a better picture where there s a will there s a way
French d plates ,nice move
what kept you?,fastest stude on the block?
don't grind anything.file it with a three sided file you will know when you hit metal.try drilling some shallow holes into the bevelled area...
looking v good there so far tasty welds and plenty of space with a clear floor,i wish
today replaced the distributor cap again .had a no spark situation when I tried to start the motor after the long lay up
purchased new cap ,coil...
sounds like the last sidecar outfit I drove.trottle on pulled right ,apply brakes went left scary in an emergency
turning out very well
I like it blak
Separate names with a comma.