The Jalopy Journal
I use Milton V fittings in my shop, and at work. The do make a noticeable improvement, even with 3/8" lines, with 1/4" NPT fittings.
19-minutes later, and just upstate!
When the original Mini Coopers graduated from 10" wheels, they moved up to 12" wheels.
There might be something in those parts bins.
Speaking as someone who has been shot, I agree.
Some of y'all are living in unnecessary fear.
You have a better chance of slipping, falling and dying in your shower, than dying of homicide.
Um, yeah they will.
In almost every case, discharging a firearm in a populated area, doubly so when your life is not in danger, is a serious...
Did a full tune up, and carburetor synchronization, follow by a brake fluid change, on a vintage BMW motorcycle, that belongs to a coworker.
We have a hoarder/collector issue out where I am.
They rarely come up for sale, in worthwhile condition. When they do, they are often upwards of...
Because that's like 12 of you.
No wonder I cannot find an affordable one.
What is the compression ratio of your 355, and how much boost are you running (or what over/underdrive), and which blower?
Well, two of those can result in hardened metal.
My former boss liked compressed air. Lots of cracks now.
Ha, same for my friends and family, and my coworkers, too.
You are correct, though, and, very sadly, everyone is called an engineer these days.
I have to deal, daily, with engineers that design things...
Oil slinger. It goes on offset away from the chain.
It keeps oil away from the back side of the seal, so it is not flooded, under braking....
I'm an engineer.
You won't find out until you have a hose or pump failure.
There is some confusion here, and terminology matters.
Hydro-Boost was a Bendix designed product. Hydro-Boost is now a registered trademark of...
100% new cars are not vintage cars.
Some states will allow new titling, as what it appears; however, if you put a vintage serial number, on...
Just to tie this into other threads on this board, they are happy to abandon you, as well, should there prove to be an issue with your VIN/serial...
We use these in the R&D shop, for sheet metal:
Away from a machine, step bits.
For drilling aluminum, when it cannot be put in a machine,...
I skated at that roller rink! It is still there!
Take care of yourself, first, Jim. Nothing else matters.
Recovery takes time, and requires patience. I know. I earned my nickname.
You may notice that the donors are all "granny cars". Many will have low miles. My head was loose, but barely needed a valve job, and had guides...
For perspective, my donor head was $40.
Separate names with a comma.