The Jalopy Journal
That is probably a barnes.
Napa I think
What does the pan and pump look like?Is it belt driven or mount on timing cover.
Rhoads lifter http://nastyz28.com/threads/rhoads-lifters-test-results.233029/
Mopar caster/camber tool adj
do you have a volt meter
the condenser on the coil is a radio suppressor not a condenser and has a different MF rating
Cut 1/8 inch off top of the accelerator pump Rises up further and has a longer squirt
Sent from my SM-J737T using The H.A.M.B. mobile app
this is a common problem on q jet,good carb. Have you done the accelerator pump mod?
I will try an get clearer pictures
one of the guys I worked with had a 1967 camaro with a 327 and tall geared 10 bolt,he went to pick and pull on a 3 day weekend and had his...
I think that was a Turbohydro 200
Trying to ID these
How about a casting number off the block or an engine ID off the right front of the deck surfaced to give us an idea of what year make and model...
Very nice,thank you for sharing.
Chevrolet has had at least four different balancers for small block Chevys and four different timing tabs plus the aftermarket ones it's just a...
The cars is not here I will get a better picture, thank you
I should know better,thanks.
On the front of my model A dropped axle, are disc brake calipers they have casting number E64328816 on them,they didn't show up on google and my...
Sync the carbs and check the throttle linkage that it is operating the carbs correctly.
The camshaft does not fit the rest of the engine,there are no tuneup spec for this.You have to just adjust everything until it works best for your...
Make sure the slots in your cylinder heads have enough room for the pushrods to move some with a different ratio
Sent from my SM-J737T using The...
ask the guy that built the tranny
As some one already stated change the rocker arm ratio
Separate names with a comma.