The Jalopy Journal
If you want to use a Reverse Rotation Ring & Pinion, Winters makes them and a Quickchange Center with the pinion opening on the other side of the...
I know your going to check it, but my money is on the drum balance weight. You might gain enough clearance by using flat head machine screws...
Any bolt pattern!
Close the Thread :D
I'm no authority on those cars. Just looking at the pics to see if they could have been Corvettes. Did the M/SP cars have to have the...
I think the Midwest car in the above photo is a one off that was actually built by one of the Logghe bros as a senior project for college....
I laughed so hard, I couldn't see the computer screen.
I believe the rule is 1965 or older but no Mustangs or Camaros of any year. :)
Hey, Slotted screws are tough but Phillips? C'mon, tweek 'em just a bit. (unless you torqued them););););)
Can somebody show the slot you are talking about?
Prayers from Davisburg, Michigan.
U.S. Postal service.
I don't think this applies to your part, but if it will fit in a flat rate box that is the absolute least expensive way....
Tap drill size for 1/2"-20 is 29/64". Axle flanges drill and tap fairly easily. A drill press is your friend.
Here you go Dave!
The axle over the spring will get it down in a hurry, but might cause more interference issues.
As the Wizard said, work to the clutch cross...
I used a brake light switch from a Triumph motorcycle. It was operated by a spring. Just attach it to the 1-R shift lever either on the...
I bought the same valve cover, rough cast as you did. My polish guy said he will match the price difference between the raw and polished...
At least you should get a lifetime supply of 'Nitro'!
How Cool is that?
My memory is that the Wide 5's were popular on the modifieds in the early 60's and got into the Late Model scene later.
The dirt guys all had...
I know nothing about that car.
But, the standard wheels used on late models of that era were 15 X 10", 5 on 5 B.C.
The tires are 10 -11" tread...
How is that a 10" offset? The tape measure looks to me to show 12".
I love this place,
@DDDenny gets his newb hands slapped and @kidcampbell71 gets a how to on a 4 year old post.
How about an...
Clinton Township, MI
My understanding is that John has been downsizing. If he will do it, there...
Who bought the Stahl stuff? He made fenderwells for tri 5s in most any diameter/length you could dream up. I know there were some as small as 1...
If you watch Bobby Walden chop this '32, you will see how a Real Pro does it.
You have to go to the...
I thought you were going to say you used it as a 3rd brake light.
Separate names with a comma.