The Jalopy Journal
Nebbish.. A person, especially a man, who is regarded as pitifully ineffectual, timid, or submissive.
"He's a nebbish, No money, no prestige, no...
[ATTACH] [ATTACH] If you come back thru Dallas you need to look up Mitchell Rosansky. He has the old Custom Automotive 32 roadster. It the one...
Did you visit the Smith boys?
Have you tried to heat the hub with a torch, while you had puller on it , that would expand it enough to break it loose.
On some of the ones I had...
Tell us More
Aligning car doors are like building a house, a house is built from the sole plate up. Think sole plate as rocker panel. You square the door to...
I have the same problem. It's like a deuce 1/2 crawling in compound.
I think some one in the 405 is looking for it
Ditto on woodiewagon46 said. Fuel thr float was inline with the pickup and it had a 45% you might fit it into tank
Just don't Californicate Texas
The weld a nut is the last resort before you have to drill and tap it . Unless you have access to a EDM.
If you have room, get a uncoated nut that will fit over the Allen, bolt or stud (it will work on all 3) then thru the hole in the nut weld it to...
Have anyone ever got a check for residual advertising from M/T or any one else?
All reducer does is thin the viscosity of the paint to make it sprayable. When you heat the paint it makes it thin the viscosity of the paint so...
That clutch lever is on the wrong side
I think it's still out of sight out of mind in the shipping container.
I put in in a shipping container when the my children were little and...
It will Definately have a very Destink exhaust note
I love to go but I am going to Gainesville to see tha Metal of Honor Recipients.
So I can thank them, and visit with my chopper pilot Serpant 6.
How did you balance the disc brakes with the band brake in the transmission.
When the brake band wore down we just used the reverse pedal.
Call CTC Auto Ranch in Denton Texas # (940) 482-3007 they have a acres and acres of old cars and that's all they specialize in. You cam Google...
Flop, Practice makes Perfect
Nick Is that a David Mann poster on the wall ?
Nick, you have came along way, your A is looking really good. You have increased your skill level a lot, you have something you can be proud of...
I love these kind of builds
I would be careful with the rear radius arms, i have seen then them wrap up and fail. Especially without running a torque tube. I would at putting...
On the 8RT fan Bob Drake has a replacement that uses sealed bearings and does away with the oil.
Separate names with a comma.