The Jalopy Journal
Thank you, got a few miles on each during the "air dry" process after the wipe downs, now I'm an aching mess..lol
Best wishes and God bless you, it sure is a crappy feeling, I'm 4 1/2 yrs in on a less than 5 yr survival average with this Cardiac Sarcoidosis...
I mapped out and hung some letters, then gave the t-bucket and Harley their spring baths.[ATTACH] [ATTACH]
I've never paid much attention to the thicknesses of ring gears but for what it's worth the first is a 3.50 and the second is a 3.25[ATTACH] [ATTACH]
The 2 most common ratios in the early 67-77 bronco are 4.11 for 6 cyl and 3.50 for V8's
To the original poster you could slide an axle in it and...
I'm quilty, think it just looks more menacing, purpose built street toughness
[ATTACH] [ATTACH] [ATTACH]
The old blown up 383 out of the Henry J, I like to swap intakes and valve covers on it for something different to look at
Anyone remember the build thread here for this car ?[ATTACH]
This is a CPP 11 inch disc brake kit with stock height forged spindles, $600 dollar kit when new, not cheap speedway stuff here. It may fit up to...
That's why I said to check the voltage earlier, I didn't have a ballast resistor but I had a wire that reduced voltage. When I switched over to a...
Very well preserved, congratulations on the acquisition
Main jet is .098
Secondary jet is .095
Metering rods are 071 x 047
Something else to check is your fuel filter and #23 in the...
I've ran 2 different engines with the same intake carbs, the mild 355 in the above video had a stock stall and the other hotter 355 had a 2800...
[ATTACH] [ATTACH] [ATTACH]
I run two 600's (Carter's) on a mild 350, it's not the size of the carbs that is the problem here.
What kind of choke do the carbs have ? Mine...
I put the tunnel ram on the Henry J motor, then played with carburetor head gear[ATTACH] [ATTACH] [ATTACH]
My latest project 57 Chevy p/u had a set on them, might put them back to help out the old parts hauler.[ATTACH]
I dismantled my Versailles rear today in preparation to put the new axle ends and big drums on, so if anyone is interested in anything send me a...
I went to the chassis shop, had lunch with the guys like every Tuesday and dismantled my 9 inch in preparation for the upgrades.[ATTACH] [ATTACH]
I had 3 doctor's appointments and knee injections but still managed to splice a couple dipstick together to get rid of that long hideous factory...
Littleman ran 10's in the quarter with a thumper cam and 6x2's in his model A p/u, maybe do a search for that.
I'm pretty sure these were 135's only about 23 inches tall if I remember right[ATTACH]
I have it in the classifieds here and craigslist for $75 or a reasonable offer.
Great looking truck, what are the details on it, sits nice.
Drained my fuel system in the 41 in preparation to change out fuel pump, regulator and ad a return line.
Cleaned up a tri-five disc brake kit to...
I ended up having a custom 11 gallon tank made to fit under the car in the stock location and use the stock filler.
I've got a 57 rear for sale in Buffalo NY, I heard rumor you can use it to convert yours to open driveline, it's 62 inches wide at wheel mounting...
Separate names with a comma.