The Jalopy Journal
i spelled solid wrong & some people just cant let it go.it must be nice to be perfect. to those that helped thank you
.is any one running this set up with a soled pedal
i have a 1951 mercury with 4 wheel drum brakes. i have installed a duel master cylinder with a power booster i have kept the floor pedal. i am...
i have a 1951 mercury. i want to install 1951 lincoln tail lights .i know the 1951 baby lincoln assembles fit without any mods. my question is are...
i have a 1951 mercury i would like to install power steering.. i see two typs of kits one use,s a jeep p.s unit the other a borgeson box. has any...
the reason i want to remove it from the bottom is because the car has an under dash air cond. & i don,t want to move it
i have a 1951 mercury i want to remove the steering box. i know the manual says it is removed from inside the car . has any one removed it from...
has any one installed a 1999 jeep p.s box in a 1951 mercury & used the origanal steering collum.
can,t find the add
that,s a real nice car
cant find the add
would you sell a pair of them
any one ever installed baby lincoln tail lights in a 1951 mercury is it a bolt in install.or was mod to the body nessary. thank you
if your going with a 21 stud use a 1937 eng best flat head ford ever made
i have read that they make a adpt. plate to install a 1999-2004 jeep power steering box in a 1951 mercury & you can keep your origanal steering...
i am speach less after a tonque lashing like that p.s coups are two doors
back in the mid 50,s we had no muncie trans. no ford 9 inch i am trying to build a 50,s tipe rod
it,s a 1954 v8
has any one done this using the orignal transmission. did the fire wall needed to be cut i am told that with the new type mini starter it clears...
block off the two carbs this way you will have the look & the car will run trouble free
is there any std shift transmission that will fit in a 40 ford with out frame mods. exculding a la sal trans car will have open drive
has any one installed a 200r4 in a 1951 mercury with a chevy 350 eng any advice would be great
has any one with a 1951 mercury with a chevy 350 eng & 350 trans installed one in there car were there any clearance problems are you happy with...
has any one put a 322 buick eng in a 1935 ford using the orignal trans any clearance problems any info would be great firstname.lastname@example.org thank you
please email me at email@example.com
i have a chevy 350 eng & an adaptor for an early ford trans is there a pressure plate i can use or do i have the flywheel drilled & taped for the...
will a 50-51 lincoln four bolt trans bolt to an early flathead hogs head
will a 50-51 lincoln 4 bolt trans bolt to a early hogs head
bought a 51 merk in the trunk is a new pair of front springs have tag that says +30%-3 any body know what that means thank you
i have a 69 chevy 307 it has a 168 tooth std shift flywheel i have an adaptor for an early ford trans the adpt. has a three bolt hole for an early...
Separate names with a comma.