The Jalopy Journal
1934 Ford commercial Grill. Good shape with small amount of rust present in lower area. $475
City: Los Angeles State: California Airplane harnesses $SOLD125 for pair of 2 lap belts. $100 for pair of shoulder harnesses SOLD
Price: $200 USD Gm Diesel gauge panel from a tuck. Cool Art Deco accents. Has been repainted. Unsure of condition of chrome under paint, but...
Early olds 6x2 Intake. I was told it’s for a 303 or 324. Looks like May be a home made, but very well made Intake from sheet aluminum. Needs some...
Here is an original airplane seat. It is made of phenolic, which was an early resin and cloth compound used to make parts on airplanes. Has the...
Price: $250 USD here we have a Safety belt that was used in gun turrets in WWII aircraft. This is for a pair of belts to use in your hot rod....
[ATTACH] [ATTACH] Original pair (2) of 1941 Lincoln FRONT brakes. These are heavily pitted and have some rust, but would look good on the right...
Well, I’m working without a paycheck at the moment and need some cash. 32-34 perch pins. Nice threads, includes the nuts $125 [IMG] [IMG]...
2 pairs of edelbrock Flathead heads. 1 59AB and 1 8BA. The 59AB has nice threads, some corrosion in the passages and a few broken fins $350...
Price: $250 USD SOLD Price: $40 USD Original stanchions sold, also have a cut up pair of Brookeville stanchions. 1928/29 Ford...
City: Los Angeles State: California Price: $SOLD 1934 passenger car grill. Needs some work, is pitted, mostly towards the bottom half, has a...
City: La State: California Price: $35 USD City: La State: California Price: $35 USD [ATTACH] [ATTACH] [ATTACH] [ATTACH][ATTACH] New old...
City: Los Angeles State: California Price: $80 USD Late 1940’s Ford squareback spindles. These still have the king pin in and we’re torched off...
City: La State: California Price: $75 USD heres a nice pair or Reproduction chrome 1932 Ford lower stanchions. The chrome is nice. I’m not sure...
City: Los Angeles State: California Price: $20 USD City: Los Angeles State: California Price: $20 USD Wishbone yoke out of a 1939 lincoln....
I’m currently working on a 28 Ford open car and the rubber seal below the windshield has hardened like old plastic. When trying to remove it, it...
I have a cracked head on a 1928 Ford engine. and need to get it and the distributor off. The set screw on the passenger side isn't there, I have...
I picked up a set of aluminum flathead heads and one of the combustion chambers has some gouging or pitting in it. Can this head be saved? Can...
It's probably time to start a thread on this to keep track of everything. I recently purchased a 1928 Australian Phaeton from a fellow HAMBer. It...
Sold 1932 Ford firewall. It has a master cylinder hole cut into it, and some other holes. Bottom was cut and radiused for transmission clearance....
This is a pair (2) 1946 medium deep dish Lincoln Front backing plates. Part number 44970. These have a 1 1/4" offset. They aren't the deeper ones...
Rear radius rods off of a 1941 Lincoln Continental $70 OBO [IMG]
1941 Lincoln Continental overdrive transmission. The gear teeth are in great shape. The cluster gear is stamped Ford. No aftermarket overseas...
I just cut down a tree and have a lot of hardwood that would be good for your next metalwork project. If you need a stump, shoot me a message
•Radiator taken off a running 1948 Ford F1 that was running a 1952 8CM Mercury Flathead. It worked fine. The owner wanted to switch to a small...
1934 Ford rear spring. This has the slight curve to it. I'll post pictures shortly $100 OBO
banjo rear out of a 1941 Lincoln continental. Has nice races. Comes with torque tube and rear bones. Brakes aren't included, but I can include for...
Sorry, I know this could fit in the links page but it's too cool and I have to share. This Zephyr has been garaged since 55. I called the guy and...
I'd hate to write a "what's it worth" thread, but I'm pretty lost here, and the search function isn't turning up much. My neighbor has a Pierce...
Hello all, I have searched the threads and am not finding much. Today I set the motor in my 1930 Model A roadster. It is on a Model A frame...
Separate names with a comma.
The Jalopy Journal
