Features 1949 - 1951 Mercury Parts/ Reproduction Parts List

I'd take some pics via pms on your digital stuff.

 

Tried Mr. Merc and Mercuryland and found the same as above.
I need a '49-early'51 Mercury oil pan. The one with the three 3/8-24 threaded studs on the bottom that tie in to the starter plate. Have starter plate, special pick-up and 1/2 bell for my project, Need pan to complete. HELP!!
Any ideas for source??
Thanks,
Howard

 

Added to the list:

http://www.metropartsmarket.com/glass/classicautoglass-c2s6.html

 

Well that is good to know that mercuryland is still in business and now I have the right email address. I have tried to contact them a couple of times this year! I know Rubber the Right way and MACs autoparts have alot of useful things. There is a guy in New jersey and one in Pennsylvania that have many parts.

 

Skavenge do you have the Jersey and Pennsylvania guys info?


Posted using the Full Custom H.A.M.B. App!

 

I'm not sure Mercuryland is still in business, anyone know for sure?

 

I'm pretty certain they went out of business. I've tried calling and emailing. The number was disconnected.


Posted using the Full Custom H.A.M.B. App!

 

I recall someone selling a cut-up dash, really just the outer part. If that sale rings a bell, please PM me. I'd like to source one to see what else could fit there...

 

I'm after the owners book that came with a 51, can anyone help please

 

I'm pretty sure you can get those through Mac's


Posted using the Full Custom H.A.M.B. App!

 

I did find the old thread, and bought it. Thanks Billy!

Winter begone!!!!!!!!!

 

Hi john my name is out and I'm looking for some mercury parts for 49. Can you help me out and pass along and one with doors or any other parts. Thank Kurt.

Posted using the Full Custom H.A.M.B. App!

 

Spell check on my phone chopped up my email text so please for give me.

Posted using the Full Custom H.A.M.B. App!

 

tkmartin5: Posting a list of what you need in the Classified would probably get better results. Give it a try.

 

I posted in the wanted section and found a ton of stuff I needed. Good luck.


Posted using the Full Custom H.A.M.B. App!

 

Pic on left is for SB and BB Chevy into the Merks.................very popular years ago when Hurst was making them..........I still use them !

Pic in the center is for installing Ford 289......302 in the Merks........

Pic on far right are the motor mount cushions (bisquits) used for both mounting installations.......

These are the most popular today and the easiest to use.........

 

very helpful. Thanks sooo much.

 

Does anyone know where to find the wheel opening patch panel for a 1949 Mercury quarter panels? Also a bolt kit for the body mounts? And who bought Mercury land?

Thanks Jacob


H.A.M.B.

 

I have coupe rockers if anyone needs a pair.

 

I could use some for my 49

Sent from my SAMSUNG-SGH-I337 using H.A.M.B. mobile app

 

Do you have any inner rockers for a 49 coupe. I need both sides.


H.A.M.B.

 

What does every one use for bolts when putting the Merc body back on the chassis? I have the rubber frame/body mounts but I did pull the body so I don't know what was there. Can regular bolts be used?
Thanks!
John


Posted while on the run with Full Custom H.A.M.B. App!

 

Here are some pics of the stuff I can make if needed. I have few sets of the rockers for coupes right now. I can make the trunk pans in one or two pieces, and the rockers with the oval holes or without. With the ovals the price is a little higher.

 

Great looking stuff!

 

I have a set of his floor pans and trunk pan, the man is an artist!!


Posted while on the run with Full Custom H.A.M.B. App!

 

Anybody ?


Posted while on the run with Full Custom H.A.M.B. App!

 

Shoot here ya go.

 

You are da man!!!
Thanks this is exactly what I needed!!!
You are my hero!

Posted while on the run with Full Custom H.A.M.B. App!

 

How much for your trunk pans ?

 

Siddnmatt, how can I contact you about your sheet metal?