Anybody got any pics of the new 32" Radir slicks mounted on a vehicle? I've seen a pic or 2 of the 12x32 tires, but I'd really like to see what the 9x32 looks like on a vehicle. I'm kickin' around a project these may work on. Thanks, Mark
I only have pictures of the 12 -32 tire mounted. The side shots should give you an idea of how tall this tire really is.
Choke: What does the height actually measure out to when mounted? Are those 15" or 16"? That's a pretty nice hunk of tire for that Chevy. Thanks
I have the 9.00 x 32" Radirs on my Willys gasser, they are real big but nice Had to cut a few inches out of my fender to get them in but it was worth it.
They certainly are John, I thought i would struggle to get them in the Willys fender but i got them in eventually, I like the look they have.
On the roadster I used 265s truck tires ,I like the look,I didnt want slicks because of the rain,and I could only get my hands on for free a set of 28 or 29 firestone slicks,,,,But that is the size tire for mock up if any body is building
I have them mounted on 10" rims. I get 31 3/4" tall w/ no weight on them. The cross section is over 14"!!! Here's a picture of the car w/ Hurt 10-30 tires on the same rim.
I wonder what they would measure on 12 inch rims? I would love to get some accurate measurements/prices etc...Do they make a 12-32 dot slick?
Yes they do a 12 x 15 & 12 x 16, have a look here, Rich is a great guy to deal with http://www.radirwheels.com/slicks.htm
Could you take a pic in about 45° angle so I get an idea how the sidewall looks compared to the rim and "tread"? Seems like a 10" rim would get the most traditional look to it. / Vince Posted using the Full Custom H.A.M.B. App!
i have a pic on my album if it helps. mine are on ten inch rims. don't be fooled to think they don't hook up. i run mine at 15 lbs no inner tube. by far the best tire out there.
How long did it take for you guys to get them? I waited 5 months on some 30x9s (I think) and I gave up and bought M&Hs instead. Would love some pie crusts in 32x9 though
I RUN 9:00- 16 (sixteen) RADIRS THEY MEASURE A TRUE 32 TALL, THATS WHY I BOUGHT THEM (BIG w/wells) THEY ACTUALLY RIDE BETTER THAN I EXPECTED AND DON'T LEAK.
Here in England it's illegal to run slicks on the road so I decided to cut a simple pattern in mine, they are really thick and have a good 11/16" before your anywhere near the cords.