Sup guys....anyone ever mess with a 1954 chevy 210 3 on the tree shifter ....shift knob or different handle???? Too boring for me.....
Not quite sure what your askin but you could go with a B&M floor shifter with a long shaft for that channeled "Rat Fink" tall shifter look. there pretty cheap and add a cool look to an old automatic, im gunna do it to my 66 deville.
Dont know if they would work with a 3 on the tree car but check it out, mr.gasket used to make some pretty cool floor shifter kits.
I'd like to retain the column 3 speed but change the knob or handle Posted using the Full Custom H.A.M.B. App!
have you looked here ? http://www.jalopyjournal.com/forum/showthread.php?t=461148&highlight=shifter+knob
If you want to change your shifter. Just change it. If you want to do something cool im almost sure its not going to just bolt right on. I mean your going to have to look at how it comes apart and play around with different ideas and probably have to do a little fab work. I don't think there is a bolt on kit where you just have to knock a pin out and bolt a four foot shifter with rat fink on it that goes from your stock 3 on the tree shifter location up threw the roof so your hands out side of the car on the knob well your jamming threw the 3 speeds.
This is a vintage FoxCraft shifter I bought from someone here on the HAMB classifieds. Its installed in my 1950 Chevy. Once the body was back on, it sat right in front of the front seat next to my right knee.