Thank for your welcome ct1932ford Mika... I can now find a place for the engine, a big engine for a small place ....
Jack, I love this build!!! Awesome fab work and use of home tools! This is what hot rodding is about! Very cool. Pete-
Thank you for your encouragements The old radiator, find in a wood, long time abandon... Make one emblem with two in poor condition. I will must shorten the radiator and at the same time change the honeycomb (maybe this is not the same expression in English) the center of the radiator?<O</O Please, how many inch should I shorten it, to you?<O</O <O</O
Now that the pedals are installed, I can present the Schroeder steering box. A jig PVC plumbing to see the clutter and make a precise hole in the colw. For attachment,I got inspired of the " wade coupe" from master B.Bass.
Thank Flatheadz ;-) Bad surprise the spring perch of origin are too short compared to the wishbone aftermarket. *trimming a 28.5 mm drill bit. *Test. *it 's OK Wishbone machined *spring,
Few months of research to understand and find the right parts with good threads Finally found a good pitman arms with the correct diameter hole...
Your talent is showing through on these parts. Well thought out and executed without compromise. Nice work. Back to the x member..what size did you have bent up? (2 x 6 or 2 x 5 3/4) Thanks,Lynn