Register now to get rid of these ads!

Projects '32/W Raising the Roof in New Zealand

Discussion in 'Traditional Hot Rods' started by brigrat, Nov 3, 2013.

  1. brigrat
    Joined: Nov 9, 2007
    Posts: 5,620

    brigrat
    Member
    from Wa.St.

    Is there a build thread on a '32 3/W in New Zealand where the guy is raising the chopped roof, can't seem to find it if it exists. Thanks!
     

    Attached Files:

    kidcampbell71 likes this.
  2. Kiwi 4d
    Joined: Sep 16, 2006
    Posts: 3,579

    Kiwi 4d
    ALLIANCE MEMBER

    Don't know about this one , it could well be judging by the old cortina in the back. The door against the wall appears more chopped than the roof. We have to have a certain amount of clear screen height in the centre of the screen to get legal so there is a chance this one was too short to pass.
     
  3. brigrat
    Joined: Nov 9, 2007
    Posts: 5,620

    brigrat
    Member
    from Wa.St.

    More info pic's that might help the memory...................
     

    Attached Files:

    kidcampbell71 likes this.
  4. bgaro
    Joined: Sep 3, 2010
    Posts: 1,189

    bgaro
    Member

    ooooh, that explains it.
     

  5. mrdodge
    Joined: Sep 9, 2008
    Posts: 335

    mrdodge
    Member

    It's 10 to one so everybody is still at lunch !!:D
     
  6. Surely thats the only reason you would want to raise the roof !!! (For cert)
     
  7. Rckt98
    Joined: Jun 7, 2005
    Posts: 1,136

    Rckt98
    Member

    Some months ago someone was running a wanted ad in our monthly Petrolhead magazine looking for the pieces that would have been removed in a roof chop on a 32 coupe. Same guy I guess.
     
  8. Kiwi 4d
    Joined: Sep 16, 2006
    Posts: 3,579

    Kiwi 4d
    ALLIANCE MEMBER

    Hmm the plot thickens , or so they say.
     

  9. Same bloke was advertising wanting door hinges too ...





    .
     
  10. beater40
    Joined: Sep 19, 2006
    Posts: 86

    beater40
    Member

    Steve woodfine ex Rusty Acres in nelson was looking for sections to raise his 3w back to stock height, dont know if he found the bits but the car is in the panel shop being resurected at present
     
  11. Kiwi 4d
    Joined: Sep 16, 2006
    Posts: 3,579

    Kiwi 4d
    ALLIANCE MEMBER

    Steve Woodfine from rusty acres Nelson NZ is the owner of this 32 3w. Direct from him, it came from Iowa recently and had been stored since the 70s minus it's Boss motor. A pretty heavy chop revealed the rear window nearly 3/8 inch lower one side. So what to do to improve the bad and make it legal for NZ roads .... Cut the roof off and square it up and raise it just a little. The debut is on track for late summer early autumn next year. There may be a build thread when the car is done , to keep some surprises.
     
  12. djwoody
    Joined: Jun 14, 2009
    Posts: 2

    djwoody
    Member

    Hi Guys, I'm the owner of the 3W in the pics on this thread ...and Yes as Brian has said ..the two main reasons for roof raise was to correct a bad uneven chop and to also make the car legal screen height in new zealand..another reason that could be included is ..i personally wanted an opening original front screen not just a glued in piece of glass !! i purchased this 3W coupe three years ago from Mike in Lewiston ,Idaho ..where it had been in storage since the late seventies.It used to run a Boss engine, which was too wild for the coupe and was sold at the Portland swap in the eighties and a brand new Edelbrock 302W engine and C4 which it will run.The beaten up bodyshell was purchased from the Oregon area in the late sixties/early seventies by Mike and was Chopped and turned into a show car in the mid seventies and had hidden door hinges and handles,and electric windows and ZZtop style stripes ..as the photos show ..we are in the process of rebuilding her and we will show photos of the finish article in months to come.
     
    kidcampbell71 likes this.
  13. paul barnett
    Joined: May 8, 2011
    Posts: 4

    paul barnett
    Member
    from idaho

    Thanks guys for your help.! You guys rule.

    Paul
     
  14. benno
    Joined: Mar 2, 2009
    Posts: 3

    benno
    Member
    from High camp

    Steve have you still got the sd rear 1/4s got a mate interested
     
  15. IronFord
    Joined: Jul 13, 2007
    Posts: 424

    IronFord
    Member
    from NoDak

    Do you have pics of the car with the Boss engine?
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.