Rebuilding the suspension of a 53 chevy. Aside from a vise what other tools do I need to make my life easier? Thx Posted using the Full Custom H.A.M.B. App!
Yea sorry I got nothing on those anacroyms. Gona have to go long hand for me. Posted using the Full Custom H.A.M.B. App!
BIG FUCKING HAMMER! I just redid the front end on my falcon. I found various pry bars, an air chisel to cut some stubborn nuts, and a set of ear muffs quite handy. Really suggest the ear muffs, bangin away on a front end is a great way to make your ears ring.
Go to chevytalk.com. Look under the 49-54 Chevy forum. Up at the top of the first page is a step by step photo tutorial on rebuilding your front suspension. I did mine on my 50. Not hard to do by any means. I got all my rebuild stuff from Kanter. Todd Posted using the Full Custom H.A.M.B. App!
Ok got most of the ft tore apart. On the upper/inners . I'm having trouble threading the opposite side in. Suggestions? I didn't want to torch it off and put myself in a bigger pickle. Posted using the Full Custom H.A.M.B. App!
? Can't remember but are both ends RH thread? As I recall those are a pretty tight fit and the manual showed some kind of a tool the shove them in and out.
Same threads. I've been ref the chevytalk link but didn't address it much. I think I'm gona use a portaband Posted using the Full Custom H.A.M.B. App!
On a 53 are the upper a arms universal. I forgot to label left/right and the look the same. Thx Posted using the Full Custom H.A.M.B. App!
What's the best way to remove the race off the ft spindles. What tool can I use. I'm at a stand still on the ft suspension till they are removed. Posted using the Full Custom H.A.M.B. App!