2 barrel carb riser

Anybody know where I can get carb risers for a Rochester 2gc ? I have a 4 x2 manifold that I want to bring the carbs up higher on. The carbs and the manifold are 4 bolt . Thanks

 

I dont know where they can be bought, but they can be made fairly simple with a chunk of aluminum. I made some years ago for a tri-power i had.
If you dont have access to a mill, a local machine shop should be able to whittle them up for you.

Tony

 

Hell, even a local carpenter could whittle them up for you, hardwood makes good carb spacers.

 

.... And the wooden ones help keep the carbs cool from the engine heat...

 

Like this?



Here

or Here

 

Try Dickster here on the board. He'll hook you up. I got some from him.

 

Dashman here on hamb......
made these tunnel ram spacers&phlonic spacers as well.........

 

I think Dashman has the on Ebay...........

 

Here is one that we in aluminum. We make them in phenolic at 1/4" and 1/2" thick and aluminum starting at 1/2" up to 2" tall. I have made them up to 4" tall for some customers.

Dashman's Hot Rod & Speed Parts www.dashman.net

Here is a pic.