How Many 348/409 owners on the H.A.M.B.

region rat,

I made it, well sort of. I started with a 2x4 Edelbrock large port intake, and a Dyers blower flange casting. Some time on my old worn out Bridgeport, some welding and viola a large port blower intake. I know it's not optimum being that I started with a dual plane intake, but after gutting it on the mill it should be ok.

Stan

ps
I'm also stan65 on 348-409.com.

 

Another W brother here.... Original 409/425 with some tricks in my Deuce Hiboy.

 

1959 348 in my dad's '58 Chevy pickup. I has three Autolite two barrels on the factory 3 x 2 intake, 340 hp 409 cam, and a Mallory dual point. It runs awesome. This engine has a sound all it's own, a really nice power curve and it just looks cool. It has. TH-350 and a 3.25 geared 9" Ford rear end that is the perfect combo with a 30" tall tire.

 

Not to worry. The blower will make it work!!

 

Got a 64 Impala true 409 car with 4 speed all numbers matching one owner car Nice ride......Plus it is for sale...any interest or trade for a deuce

 

I have a handful BUT they are in storage until I get a garage to work on stuff.

 

1964 409 655 out of a chris craft boat going into my 62 impala with 2x4 edelbrock. Also have a 656 block 348 for something.....

 

I had a 2-4 409 motor in a 62 impala back in the 70's. Traded for another 2-4 motor in 77 and kept it till about 85 but never put it in anything. I just made a deal today for a running 65 truck engine and will pick it up tomorrow so am again a '09 owner.

 

i just sold my 55 convertible with a 348 tripower, all i have left is a 64 340hp 409 waiting for for some inspiration

 

Very Nice

 

wish i had one only bbc.

 

Running a tripower equipped 348 with a camaro T5 in my model-A



And a stroked 348 gonna sit in my sons 59-Impala kustom when it´s finished.

 

I have a 1958 348/Tri-Power just sitting on the stand

 

I've got one!
It's stroked to 476ci. And it's best time is 10.10 @ 128mph.

 

Have 2.
409 4 speed in the 62, non original. And an unrestored numbers matching 409 glide 63 impala.

 

Here's the 09 truck motor I picked up yesterday fresh from the truck then after taking off all the truck parts.

 

I wanna be Went to the drag strip for the first time at age 12 in a dual quad, 4 speed, posi traction 409. It was new attached to a 62 Impala SS. I was hooked forever.

Pat

 

I've got a stroked 409 and six deuces in my 31 Tudor

 

I have a 55 Belair Convertible with a 409/425 4-speed and currently working on a 58 Chevy 1/2 ton step side and installed a 58 348 with a 4-speed. I can't wait to have it done and see then side by side.....

 

I've got a 425-horse engine that's been apart since I bought it forever ago.
Have a set of high-dollar rods, an MSD ignition, a Rattler damper and a roller cam that'll eventually get put in the block with a stroker crank and good pistons.

-Brad

 

62 Belair Sport Coupe 474 inch 09 5 spd
32 Five window 09 4 spd

 

I'm parting out a 60 nomad wagon with a 348 . It's going into my 55 chevy "Two Lane" style car with my 4-speed .. Pictures soon ...Larry

 

your car is the "pretty" twin to the one i just sold. 348 tri-power 5spd

 

Awesome to know there is another 55 "W" convertible out there!

 

58 impala, 348 3x2s, isky cam, dougs headers, close ratio Muncie and 3:70 gears


Posted using the Full Custom H.A.M.B. App!

 

I put a sign up wanting 348/409 parts in my swap meet booth and a guy sold me a 348 that runs for $300 and then put an ad on Craigslist and got a tri power intake for $100 and another tri power intake WITH original carbs for $200 and found a of Edelbrock boat headers on Craigslist in Cali for $150 shipped to me. It's going in a '31 Chevy sedan rat rod. Need to figure our what manual transmission and bell housing to use.

 

We don't do rat rods here....
This is a traditional hot rod site.. Big difference...

 

409 attached to a 1929 rpu just picked her up.