Art & Inspiration >>>> Friday Art Show 06/14/2013 <<<<

SanDiegoJoe · Jun 14, 2013

Pewter Flying Eye Pin by UnklIan... there were some holes in the speaker grill left from where someone screwed something there. This was the perfect cover-up, the pins on the back aligned perfectly with the slots and the size was just right for a snug fit.

57 Corvette ~ Bob · Jun 14, 2013

Gary B, thank you ......

Mark, thank you, much appreciated ....cool pick up.

Britt8M, very cool work ......

Frogz, love the Pig Boy, cool concept......

Wild Willy, thank you ..... love your Mels drive-In, one of my favorites.

Offset, great idea for a new Fathers Day greeting card .......thank you.

Tommy's Cycle, very kool sparky ...nice job.

roseville carl · Jun 14, 2013

Ya got me at this one Jigger

Course I'm a succker for anything Flat............ thanx

Jigger · Jun 14, 2013

roseville carl said: ↑

Ya got me at this one Jigger

Course I'm a succker for anything Flat............ thanx
Click to expand...

Thanks Carl, glad ya like it, thanks for the kind words!

Thanks Bob!

Killer sparky Tommy's Cycle!!!

Roscoe Clyde · Jun 14, 2013

Deck lid I did for a 63 Falcon.

Roscoe Clyde

LOWCAB · Jun 14, 2013

Newest from me. Fine art all around.

realkustom51 · Jun 14, 2013

Great show everyone. I found a customcory floor scrap.

speedfreek155 · Jun 14, 2013

BOMONSTER said: ↑

Last week Vonzemo posted a great drawing of the Atomic Punk. Here's my scratchboard version done for an upcoming show. And here's how I did it:

First I do a graphite transfer of a basic drawing without the details. I usually start with the "people" as there's nothing worse than doing a great car rendering and then messing up on the people part. Although in this case a slight screw up wouldn't be that obvious. HAHAHA. Very Salvadore Dali

Once I scratch some basic outlines then I go in and start adding detail. I'm looking at a source image while I do it. In this case my own photograph from the GNRS. I usually tweak the perspective and make the engine and wheels bigger than normal to give cars their own attitude. This one doesn't need much attitude adjustment but I always want to give some anyway. I wear archival gloves to keep the board oil free. I can be a very oily person when I don't want to be.

I added some detail in the back - sort of a combination of influences with a 59 Plymouth Fury and Ed Roth's Beatnik Bandit. I always sneak in my own build somewhere in all my pieces- a 1964 Kellison which is shaped like a '58 Ferrari. I figured this would be a good place to hide it.

I like adding a scratchy light effect which gives my work it's own look. Basically a lot of wiggly scratch lines until the area is covered with scratchyness. For all my work I use a single blade - a #16 Xacto. There are some various shaped tools for scratchboard but I use only one blade - although I go through 7 or 8 to complete a 12x16 piece like this. This one didn't take a long time to scratch - maybe 4 hours starting and stopping late at night. When I'm finished I spray a Krylon matte finish coating over it which hides the smudges and guide lines.

Thank you for your undivided attention. Now you know how it's done.
Click to expand...

As always your work is painstakingly incredible !

dante81_98 · Jun 14, 2013

HIDDEN said: ↑

Little vector action for a club shirt.

Click to expand...

That I just put an order in for. Had to have it since I am building a 50.

DamnNoNamesLeft · Jun 14, 2013

Simply amazing Friday Art Show again.. HIDDEN, i dig that pickup.

fortypickup · Jun 14, 2013

Great show guys. Here's my latest

Posted using the Full Custom H.A.M.B. App!

Sander · Jun 14, 2013

Awesome stuff guys!

Some pen sketches

Mellow Henry J "gasser"

dmccraryart · Jun 14, 2013

Happy Father's Day, everybody - great stuff from all, as usual!
After a couple of weeks on the road, here's my offerings for this week.
"Fins at Sunrise"
"Miss Mercury and Her Shy Neighbor"
"Jan's Truck" (all water colors, of course...)
Thanks,
Dan

MannyK · Jun 14, 2013

Some computer art!

Posted using the Full Custom H.A.M.B. App!

scrubba · Jun 14, 2013

My son gave me the best Father's Day present a parent could ever get ........ early:

scrubba

Unkl Ian · Jun 14, 2013

Reverse painted background, pinstriped by hand.

Unkl Ian · Jun 14, 2013

Looks excellent Joe.

SanDiegoJoe said: ↑

Pewter Flying Eye Pin by UnklIan... there were some holes in the speaker grill left from where someone screwed something there. This was the perfect cover-up, the pins on the back aligned perfectly with the slots and the size was just right for a snug fit.
Click to expand...

ALLISON · Jun 14, 2013

Very cool monster!!!!

bomonster said: ↑

last week vonzemo posted a great drawing of the atomic punk. Here's my scratchboard version done for an upcoming show. And here's how i did it:

first i do a graphite transfer of a basic drawing without the details. I usually start with the "people" as there's nothing worse than doing a great car rendering and then messing up on the people part. Although in this case a slight screw up wouldn't be that obvious. Hahaha. Very salvadore dali

once i scratch some basic outlines then i go in and start adding detail. I'm looking at a source image while i do it. In this case my own photograph from the gnrs. I usually tweak the perspective and make the engine and wheels bigger than normal to give cars their own attitude. This one doesn't need much attitude adjustment but i always want to give some anyway. I wear archival gloves to keep the board oil free. I can be a very oily person when i don't want to be.

i added some detail in the back - sort of a combination of influences with a 59 plymouth fury and ed roth's beatnik bandit. I always sneak in my own build somewhere in all my pieces- a 1964 kellison which is shaped like a '58 ferrari. I figured this would be a good place to hide it.

i like adding a scratchy light effect which gives my work it's own look. Basically a lot of wiggly scratch lines until the area is covered with scratchyness. For all my work i use a single blade - a #16 xacto. There are some various shaped tools for scratchboard but i use only one blade - although i go through 7 or 8 to complete a 12x16 piece like this. This one didn't take a long time to scratch - maybe 4 hours starting and stopping late at night. When i'm finished i spray a krylon matte finish coating over it which hides the smudges and guide lines.

Thank you for your undivided attention. Now you know how it's done.
Click to expand...

ALLISON · Jun 14, 2013

lovin that Henry J too Sander... lots of awesome stuff this week from everyone.
only a few I can show for me.

The Eldorado Con Gusto......

ALLISON · Jun 14, 2013

.... and some fun

Offset · Jun 14, 2013

Scrubba, very nice.

mctim64 · Jun 14, 2013

I know you've posted this before but it's deffinitly one of my favorites!

ALLISON · Jun 14, 2013

... and for my pappy, a Henry J doodle!

Rdono · Jun 14, 2013

[/url][/IMG]

Just something we knocked out for a fellow hot rodder, and all around great guy, Jimmy Fraser.

kenmo · Jun 14, 2013

GaryC. said: ↑

This art was done as a gift to a young man
who's had some bad luck come his way recently.
He built this car himself. He's only seventeen.
Well done!
Click to expand...

Very nice Gary...hope his luck returns soon...

kenmo · Jun 14, 2013

57 Corvette ~ Bob said: ↑

Happy Fathers Day to all the dads out there ........

Click to expand...

Another classic Bob... If Norman Rockwell was an hot rodder he'd be you....

kenmo · Jun 14, 2013

Frogz said: ↑

Cool start guys !

Click to expand...

Love your style....

kenmo · Jun 14, 2013

ALLISON said: ↑

.... and some fun

Click to expand...

Damn cool work... Love them all...

kenmo · Jun 14, 2013

Sander said: ↑

Awesome stuff guys!

Some pen sketches

Mellow Henry J "gasser"

Click to expand...

Love your pencil work....

kenmo · Jun 14, 2013

Jigger said: ↑

Bo, you're making me want to do a scratchboard!!! This piece is the créme de la créme,
just amazing!

Bob, I really dig it!

Frogz, that's cool!

Gary, that is cool, way to kick it off!

Was hoping to take this to another level but it will have to wait. The girl kinda reminded me of someone while I was drawing it but I can't pit a finger on it...

Funny story, I drew the car while on a business conference call and the girl the next night at my son's baseball game, between innings (6) ... His team won and the meeting went great!

Click to expand...

Amazing skill you possess Mr Jigger....

Log in or Sign up

Art & Inspiration >>>> Friday Art Show 06/14/2013 <<<<

SanDiegoJoe Member from San Diego, CA

57 Corvette ~ Bob Member from Los Angeles

roseville carl Member from roseville calif 1935-1937 Ford pickups Northern California HAMBers Vintage Dragster Association Front Engine Dragsters

Jigger Member from Neligh Nebraska Omaha area HAMBers 60s Show Rods ///Friday Art Show Talent\\\ (F.A.S.T.) Pontiac Power Central Nebraska H.A.M.B.

Roscoe Clyde Member from Mt Holly NC

LOWCAB Member from Houston

realkustom51 Member from Hickory, NC

speedfreek155 Member from Rockvale , Co

dante81_98 Member from Phoenix, AZ A-D Truckers

DamnNoNamesLeft Member from Finland

fortypickup Member from Nebraska

Attached Files:

1371233488382.jpg

Sander Member from Redondo Beach, Ca.

dmccraryart Member from charlotte nc

Attached Files:

FINS-AT-SUNRISE.jpg

merc-w_flames-10-x-7.5.jpg

truck-final.tif-10-x-7.jpg

MannyK Member from NYC Traditional Kustom Cars Upholstery

scrubba Member from Richmond Va. for now

Unkl Ian Member from Troll Station, Antarctica.

Unkl Ian Member from Troll Station, Antarctica.

ALLISON Member from Lakeland Mn / Spokane Wa

ALLISON Member from Lakeland Mn / Spokane Wa

ALLISON Member from Lakeland Mn / Spokane Wa

Offset Member from Canada

mctim64 Member from California, somewhere just below Fresno.

ALLISON Member from Lakeland Mn / Spokane Wa

Rdono Member from Palo Alto, CA

kenmo Member from Halifax, Nova Scotia

kenmo Member from Halifax, Nova Scotia

kenmo Member from Halifax, Nova Scotia

kenmo Member from Halifax, Nova Scotia

kenmo Member from Halifax, Nova Scotia

kenmo Member from Halifax, Nova Scotia

Share This Page

Useful Searches

Archive

Atomic Industry

Support

Subscribe

SanDiegoJoe
Member

from San Diego, CA

57 Corvette ~ Bob
Member

from Los Angeles

roseville carl
Member

from roseville calif

1935-1937 Ford pickups

Northern California HAMBers

Vintage Dragster Association

Front Engine Dragsters

Jigger
Member

from Neligh Nebraska

Omaha area HAMBers

60s Show Rods

///Friday Art Show Talent\\\ (F.A.S.T.)

Pontiac Power

Central Nebraska H.A.M.B.

Roscoe Clyde
Member

from Mt Holly NC

LOWCAB
Member

from Houston

realkustom51
Member

from Hickory, NC

speedfreek155
Member

from Rockvale , Co

dante81_98
Member

from Phoenix, AZ

A-D Truckers

DamnNoNamesLeft
Member

from Finland

fortypickup
Member

from Nebraska

Sander
Member

from Redondo Beach, Ca.

dmccraryart
Member

from charlotte nc

MannyK
Member

from NYC

Traditional Kustom Cars

Upholstery

scrubba
Member

from Richmond Va. for now

Unkl Ian
Member

from Troll Station, Antarctica.

Unkl Ian
Member

from Troll Station, Antarctica.

ALLISON
Member

from Lakeland Mn / Spokane Wa

ALLISON
Member

from Lakeland Mn / Spokane Wa

ALLISON
Member

from Lakeland Mn / Spokane Wa

Offset
Member

from Canada

mctim64
Member

from California, somewhere just below Fresno.

ALLISON
Member

from Lakeland Mn / Spokane Wa

Rdono
Member

from Palo Alto, CA

kenmo
Member

from Halifax, Nova Scotia

kenmo
Member

from Halifax, Nova Scotia

kenmo
Member

from Halifax, Nova Scotia

kenmo
Member

from Halifax, Nova Scotia

kenmo
Member

from Halifax, Nova Scotia

kenmo
Member

from Halifax, Nova Scotia