Register now to get rid of these ads!

57 Ford power steering

Discussion in 'The Hokey Ass Message Board' started by bill james, Jun 6, 2013.

  1. bill james
    Joined: Nov 22, 2011
    Posts: 7

    bill james
    Member
    from olean ny

    Anyone know if the 2002 steering will bolt into my 57 Victoria. I read on here that it works on the 57-60 F100 but I don't know if it will work on my car. Any other suggestions. I would like to have PS/PB and that sounds like the best way to go. Thanks, Bill :confused:
     
  2. hoop
    Joined: Mar 21, 2007
    Posts: 643

    hoop
    Member

    Borgeson in Ct. They have a kit.
     
  3. JEM
    Joined: Feb 6, 2007
    Posts: 1,040

    JEM
    Member

    By '2002 steering' I suspect you mean the late (2003-up, I think) front crossmember assembly, the short answer is "no". The long answer is "if you cut the spring pockets out of the rails, grafted on some flat rail sections, you could probably bolt it up but then you'd have to contend with a track width much wider than what you've got."

    Borgeson is the off-the-shelf answer, maybe ABS Power Brake as well.
     

  4. easyissy
    Joined: Mar 23, 2011
    Posts: 133

    easyissy
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.