Sorted out the distributor this weekend. I borrowed an old original Hemi distributor off Jer and I had an old mallory dissy from a SBC. first job was to strip the mallory unit down and cut it to length [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor001.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor001.jpg" style="max-width:100%;"][/a] Next put it in the lathe and turn the diameter down. [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor002.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor002.jpg" style="max-width:100%;"][/a] then I made up an ally adapter and pressed it onto the dissy body.i then pressed the bronze bush back into the end of the body. [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor005.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor005.jpg" style="max-width:100%;"][/a] [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor006.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor006.jpg" style="max-width:100%;"][/a] here they are side by side [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor008.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor008.jpg" style="max-width:100%;"][/a] Next job was to modify the drive shaft. First cut it to length [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor013.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor013.jpg" style="max-width:100%;"][/a] Then machine the flats on the end of the shaft. I don't have a mill so had to make do with the lathe. [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor014.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor014.jpg" style="max-width:100%;"][/a] Put it all back together and it fits a treat. The plan is to fit a petronix kit in it. [a href="http://s21.photobucket.com/user/kelvindunn/media/Hemi%20Coupe/distributor017.jpg.html"][img src="http://i21.photobucket.com/albums/b254/kelvindunn/Hemi%20Coupe/distributor017.jpg" style="max-width:100%;"][/a]