Looking for a new camshaft

for a dodge coronet 270 poly. Already tried Atlas, Bernbaum, Roberts, Rock Auto. No luck. Round up hopes are fading. Anybody have any other possible vendors?

 

Schneider re grind?

 

Might want to check with this guy;

Nielson Vintage Racing Cams

644 West 100 North, P.O. Box 416, Farmington, UT 84025 (801) 451-7745

 

Pick up your phone and call these folks:http://deltacam.com/

 

I am just wondering if there is no other option than a re-grind? Does nobody have an original stock camshaft in stock?

 

Even Egge Machine shows it as an R&R part. If they don't have a line on fresh ones, I don't know who would.

 

Just recently sent my '56 Buick Roadmaster cam to Delta Cam and I am super impressed/happy with the result. Being a one year/model specific cam, it was hard for me to discard my damaged cam and they came to the rescue of repairing a pretty haggard stick!

 

Oregon Cam will regrind or build up a grind your existing cam You are not going to find new cams for these engines. I know, I built a 270 and looked everywhere. You might check Bob Walker at Hot Hemi Heads he bought a couple new cams from Oregon