Sorry man,normal 1/2" bolts take a 3/4" wrench. Regardless, there seems to be little point to this. I use mine often. Posted from the TJJ App for iPhone & iPad
Wow!! I have not read all the replies to this question, because in addiditon to be boring as hell, this has got to be one of the dumbest wastes of band width for Ryan and this website. Are you guys seriously going to continue to reply with the facts like, an 11/16" wrench fits the knifflen bolts on my Big Wheel modified bicycle? We are all doomed!! (smiling...sorta)
Wow.this is a thread? I've used my 11/16 wrench many times.not as much as others but still gets used non the less And to the post about 11mm, my 01 daily driver mustang gt takes 11mm
I took the original cowl lights off a 31 chevy yesterday the nuts were 11/16. which goes to show that it is traditional also.
me every time I grab a 5/8 and 3/4 to take something apart,,, it is always an 11/16 I have to get up off the floor for.............
3/8 extra heavy nut uses 11/16 wrench. Took a brass hose fitting out of a gas tank today it took a 11/16 wrench.