Aluminum intake help

Piece of cake!

 

My Winters manifolds have the W in the middle of the snowflake. They are off 68 & 69 Z-28s.

 

Good job!

Way to get after it!

 

Weld a nut...let cool the heat will do the work for you.Should shrink that plug a little.

 

I'd drill it and retap

 

The single plane Duntov intake that has the runner that run's from each bank in the back is a good one if it is tuned properly.

It supposedly keep's those two runner's from robbing each other. Thus balancing the air supply port to port.

pdq67

 

Come on fella's, he got it out 4 days ago......

 

I realize it's too late to help because it's already out, but why didn't anybody suggest drilling the center out, and using an easy-out, with heat?

 

I have 2 Holley Strip dominator single planes with the winters logo. They must have cast them for holley for a period of time.

 

when it comes to stubborn shit like stripped threads, broken bolts and other messed up stuff , just take your time and will work , leave the BFH in the tool box , be like a Honey Badger and fear nothing , persistence pays when shit is screwed up,