unibody f100 guys

I just picked up a 62 with the original skinny wheels and tires. Going to be dropping it soon via static drop. What are you guys running for wheels and tire size? I have the original hubs and would like to find a 15 inch steel wheel that will accept the hubs
Any suggestions?

 

No clue what works on stock suspension, but heres a free bump, im running a crown vic front end on mine and stock 06 mustang rims and tires

 

Yea planning on doing a front clip someday. Just trying to get it low and cruise it for awhile

 

235 /15 ,s on the front of mine and 255 /15,s on the rear take out a few leaves on the front an rear and itll drop it a couple of inches

 

Was thinking about filpping the leaves in the front. What issues will it cause?

 

None, if you raise the steering box...it will get real low as well...here is a great thread to get you started http://www.jalopyjournal.com/forum/showthread.php?t=531700

 

Thanks

 

Like to see your Uni. I am working on a short '61 now and I have the CV front end/rear end already under it. I'm running stock CV rims and tires for now. What are you running for a motor? I have the 300 six with AOD in mine.

 

theyll probably hit the frame big time

 

Slick 60 Message Board has a couple of threads on the Vic conversion. Another HAMBer I know did this to his truck also and really likes the end result.

 

i just cut one of these trucks up and sent it to the scrapper cause no one wanted it .

 

Nash mine has the 6cyl in it as well 3on the tree.