Need old Moog parts numbers for '60-'62 Chevy truck

Does anyone have an old Moog catalog with '60-'62 Chevy front suspension parts?

I've got one that has the tie rods, sleeves, bump stops, ball joints, pitman arm and idler arms, but I need the numbers for the upper and lower control arm shafts and seals.

Thanks,
-Brad

 

I might have one will try to look tomorrow

 

http://www.rockauto.com/

Catalog is easy to use. Parts prices cant be beat. Couldnt look them up not knowing what model etc.?

 

They don't have 'em, according to their website.
A local shop here in town has shelves full of old MOOG parts, but they don't have a catalog that covers the pieces I'm looking for.

He said he has a supplier that has found some nice dusty boxes in the warehouse before, but I gotta give him the part numbers.

-Brad

 

upper control arm kit 58-64 bushing kit K5196 2 kits required per car

lower control arm kit 58-64 shaft kit K293 2 kits per vehicle

lower control arm bushing kit K304 1 kit per vehicle

hope that helps Bruce

 

Those are passenger car... I need C10 1/2-ton truck.

-Brad

 

Dont know if 63 is the same but thay show K6147 for lower and K6098 for upper.

 

Nope, '60-'62 was torsion bar and completely unique upper and lower control arms.

It's a 3-year-only front suspension.

-Brad

 

If I don't see an answer for you by tonight, I'll look. I've got a few old Moog catalogs at home.

 

My catalog is a 1971 and it doesn't list the part numbers you are looking for. Maybe Moog didn't make them?

John

 

Looking for my Moog book also. I also have a old GM parts book . Worse case we can cross over the GM number....get back later with that...j

 

You might have to find someone with a Hollander interchange book for those years.It will cross over your truck to anything else that used the same part.Might have a better chance finding the part that way...

Steve

 

Found a 2009 LMC Catalog and they have a listing for the complete upper control arm less ball joint for $149.00 at 2009 money or upper shaft assy. for $39.95. Their part number are of no help.

 

ask the guys on 67-72 chevy truck site it covers trucks back to the 30's and stovebolt.com the guys on chevytalk.com might know.

 

I have the Moog catalogues from back in the day and the illustrations are there, but they did not list any part numbers for the upper and lower inner control arms or bushings.

 

Yeah, I've got similar posts over on those sites, but this place consistently produces results... no matter the subject, you'll get an answer! And usually quick-like, too.

It looks like Moog didn't carry those shafts.

LMC has them, but the lowers are $139 each.
(I think the previously-mentioned control arm is the '63-up style)

-Brad