53/54 chev tell us the new repo you need

They only sell the grill teeth. Anyone know of a company that makes the grill surround? Top, center and lower bars?

 

front fender lower rear section behind the front wheel (outer skin) is available

the inner brace to this part is coming in about 5 weeks

the ems guy

 

5 weeks is up!!! the inner brace is ready now for the outer skin of the lower front fender

 

here is a photo of the fender outer skin #305 and the inner brace #309

ems auto 216-541-4585 www.emsautomotive.com

 

wagon tailgate skin

 

How far off are the door bottoms? I could definitly use those!

 

in stock

 

RAD! Thats good news.

 

rear gravel shield: this is the filler between the bumper and the body,

part #310

we have tested the tooling and it is a sweet looking part: hope to be able to ship parts by mid april 2012.

call us with any questions: 216-541-4585

 

I agree with the cpillar, every one I have seen around is either rotted or paper thin and pitted and if you are chopping your car that sucks!!!

It creates a lot of pita work...

 

send me a photo so i understand this part and the rust area

the ems guy

 

I didn't know the bumpers were two piece. I thought they were all one piece

 

full length quarters, full length half quarters, quarter window pockets, full or half floors would be nice too,

 

the bumpers are actually 3 piece.

 

Hmmmm, I've only seen one piece bumpers with bumperetts, I guess I don't understand. (we are talking passenger cars, right?)

 

under the bumperettes is the seam for the 3 sections. Unless you look for it, you'll never know if its one or 3 pieces.
Insurance companies like the 3 piece, as it's cheaper to just replace a part of something, rather than all of something.

 

Well I'll be darn, your right, never noticed that before.

 

Had to go out and look at the backside behind the bumperetts on mine, it's one piece but it was a west coast car.

 

are you guys really selling this garbage? better be no more than 30 or 40 bucks.

 

We got lots of call on this piece and we heard your request

this is new and ready to ship

1953-54 chev

rear gravel shield the filler between the rear bumper and the body. P/n: 310

ask for john 216-541-4585

this is a quick pic from my personal cam later we will have a pro shot

49-52 coming later in the year and we are working on the front gravel shields now

the ems guy

 

EMS- that rear gravel shield looks like a nice piece. still want full length quarters!

 

we are going to start on the front gravel shield (radiator apron??) very soon.

Are there any fit issue's or comments on how they work or look?? these are very large pieces so all the info would be good to have

the ems guy

 

wagon tailgate patches for me 2

 

forgot to post this: they have been done for a while

the 4th row floor brace is now available: p/n: 308,

so now all 4 rows of floor braces are complete

www.emsautomotive.com

the ems guy

new suggustions still welcome

 

Apologies if this has been asked before, but are there any plans to do 4 door bottom panels?

 

we are working on convert.hardtop door bottom kits now and front lower 1/4's for the convert/ hardtop.

rattle my cage every few months so i do not forget

the ems guy

 

I too would like to see full rear quarters

 

Full Quarters for a hardtop. We do fiberglass and currently do front and rear pans for the 53 and 54. We are also thinking of doing hardtop doors. But that is about all for these cars.

 

would really like to see hardtop door skins. Have had three sets of these and all of them needed skin work.

 

a few post above this we have mentioned that door kits for the hardtop/conv are in the works


full 1/4's means expensive truck shipping

the ems guy