How about an Official HAMB "PATTERN PAGE" !,... Or not ????

so....let's see 'em!

 

Great idea!!! I have some I'll have to find them???

 

Any one have a 1946 Ford truck cab in a Autocad 3d model??

 

I do CAD too, and I have a few patterns I can contribute.

 

Once they start showing up on here.......make it a sticky!!

 

Great idea! I have a drawer full!

 

I was hoping this thread would take off. Maybe with this bump it will materialize.

 

Kinda fizzled. My home computer broke, I'm typing from my phone and can't contribute.

 

I am supposed to get the patterns for the filler piece for 36 sedan fenders to fit a coupe.

Will make a copy...............if I know how to do it.

 

Me thinks its a great idea and hope lots contribute.

 

It's the best idea I heard today! I have some ACAD files I would contribute...

 

Does anyone do custom cad drawing? I need the bellhousing pattern for a BMW.V12
want to make an adaptor to a turbo 400.I will pay for there services

 

I can do a CAD drawing for you, but I'd need a sketch with good dimensions, or a part I could measure.

 

3 pages...28-9 Tudor roof wood..the spars, and the pieces at each side front and rear that the spars bolt into

 

I know I am going to catch hell for this statement, But the reason you are not seeing 30 guys post Cad drawings or other patterns of parts, brackets etc here Is...They spent alot of time and hard work to make the product. And Some of them make their living doing this. Only to have others copy their hard work and claim it as their own. Design your own stuff or buy what is on the market.....just my 2 cents

 

Wow, I thought this thread was about a month or two old. Seven MONTHS LATER....

Anywho, what happened? I'll draw some good stuff up for rear end brackets and such when my chassis is finished next week. Need a break.

 

so true, and funny, glad to hear others are afflicted with the same sickness. ME, why yes, there is a rip in my marble bag. WHY?

 

I have a pattern i made for a 52' buick 320 straight 8 for the intake flange.

I think this is a fantastic thread!

 

In case someone wants to build hedders for the Olds Rocket engine, I made these Head-flanges a long time ago.

 

VON RIGG FINK.... Thanks Randy for the wood info. Downloaded and saved!

See guys? THIS THREAD WORKS!

I could add some electrical circuits, but don't know how to do that, other than draw it on paper and photograph them!

 

Just a thought on a VERY good idea.
They make cheapo scanners now ($29.95 IIRC) that will convert any paper drawing to jpeg or PDF. Kinko's and other print shops often have copiers that will scan and save to a flash drive as well.

Be sure to dimension everything. As I have found out in the past, scanned images often do not print out with the actual shape of the original, even if you get the size right. This cost me about a week on getting a fuel cell built a few years back.

The only way I would trust a printed image as a template is if it was done straight out of a CAD program on a plotter.

 

i think this is a very good idea.....make it a sticky...

 

Has anyone got a pattern (or wants to make one) of all the original holes that are in the chassis rails on a 1932 Ford. I've seen a thread with some measurements and hole sizes but a pattern would be great. Thanks in advance !!!!

 

Here's a bolt circle template that may be helpful.

 

The .pdf are a dead link

~out plowing

 

This is a great thread!

 

Here is cvstl's pattern being put to use:

http://www.jalopyjournal.com/forum/showpost.php?p=8284020&postcount=12

 

What a great thread but not many patterns.

 

If you guys can give me hand sketches I can convert them to CAD and PDF if needed as time allows.

 

does anybody have pattern for the cab wood spacer's for a '40 ford truck?