Register now to get rid of these ads!

Let's see sedan delivery pics!

Discussion in 'The Hokey Ass Message Board' started by Ocean56, Apr 29, 2010.

  1. slammed
    Joined: Jun 10, 2004
    Posts: 8,150

    slammed
    Member

    The '80's: 396+.30 Crane Cam Hedman headers, 400 turbo 10 bolt posi[​IMG]
     
  2. ICEMAN-29
    Joined: Dec 8, 2009
    Posts: 35

    ICEMAN-29
    Member
    from colo.

    Ok here,s mine 1929 two door sedan delivery I made 302 4 speed
     

    Attached Files:

  3. Nitro Breath
    Joined: Oct 26, 2012
    Posts: 57

    Nitro Breath
    BANNED
    from Eugene, OR

    Model A's, sedan delivery and panel delivery.
     

    Attached Files:

  4. Deuces
    Joined: Nov 3, 2009
    Posts: 23,752

    Deuces

    ..........;)
     

    Attached Files:

  5. Hemiken
    Joined: Sep 21, 2012
    Posts: 492

    Hemiken
    Member
    from Australia

    That is the one i built for a friend, i did the conversion from a sedan on the 40 Willys. ;)
     
  6. Locoxp
    Joined: Jul 20, 2012
    Posts: 18

    Locoxp
    Member

    used to be a 4 door wagon so i fixed it, not the best photo cause its still in surgury
     

    Attached Files:

  7. Hemiken
    Joined: Sep 21, 2012
    Posts: 492

    Hemiken
    Member
    from Australia

    Here is mine, it started life as a VE Valiant and is now and has been for a long time a 1968 Dodge Dart Sedan Delivery, running 400 Big Block Mopar, all original short block built in 1974, original compression of 8 to 1, just a Mopar cam and aftermarket intake, still uses cast iron exhaust manifolds and runs 14.02 quarter mile. Have another engine on the go so i can actually go fast. ;)
     

    Attached Files:

  8. bonez
    Joined: Jul 16, 2007
    Posts: 3,487

    bonez
    Member
    from Slow lane

    For some reason i think that high rider stance really make it look super kool. :cool:

    Not the use i'd have for it but it looks bad ass!
     
  9. jalopy45
    Joined: Nov 5, 2005
    Posts: 529

    jalopy45
    Member

    Being a Canadian Pontiac it's on a Chevy chassis and uses a chevy power-train.
    The wheelbase is 5 or 6" shorter than it's US counterpart.. :D
     
    Last edited: Jan 11, 2013
  10. Paul B
    Joined: Sep 29, 2007
    Posts: 941

    Paul B
    Member

    Picked this up last month
     

    Attached Files:

  11. Useta was mine....
     

    Attached Files:

  12. wldtrout
    Joined: Apr 4, 2011
    Posts: 198

    wldtrout
    Member
    from montana

    Here is my 35. I hope to start on it next year.
     

    Attached Files:

  13. koolkemp
    Joined: May 7, 2004
    Posts: 6,005

    koolkemp
    Member

    very cool 35 ^^^
     
  14. Mr Mayo
    Joined: Aug 1, 2008
    Posts: 183

    Mr Mayo
    Member
    from Huff, ND

    Since this is an old thread, here are some old pics. St. Paul, 1977:
     

    Attached Files:

  15. Model T1
    Joined: May 11, 2012
    Posts: 3,309

    Model T1
    Member

    Thanks for the great sedan delivery photos.
     
  16. My pal & fellow club member Ken's 29 sedan delivery,,gratuitous shot of our wagon in the background. ;) HRP

    [​IMG]
     
  17. Django
    Joined: Nov 15, 2002
    Posts: 10,198

    Django
    Member
    from Chicago

    What's the build plan for it? Looks pretty sweet!
     
    benno likes this.
  18. wldtrout
    Joined: Apr 4, 2011
    Posts: 198

    wldtrout
    Member
    from montana

    I'm thinking vintage look, steelies and 48 caps. Stock height, maybe even keep the roof insert. Really low. Small block ford and c-4, 9 inch and mustang II. I want a nice cruiser that will go the distance. Any ideas??
     

    Attached Files:

    Last edited: Jan 12, 2013
  19. raymay
    Joined: Mar 2, 2008
    Posts: 2,532

    raymay
    Member

    One of my favorite builds from the 80's was our 37 Sedan Delivery. I found it in the swap sheet and had a friend deliver it to me from a real Jimmy Hendricks fan who owned Franks Used Cars in Texas.
    With the family in mind I built a concept toy model of what I had in mind and had decided to turn it into a window delivery. Used a plasma cutter for the first time to cut out the side panels. Learned that deliveries are coach kits so they have some wood in them. Spend a lot of time replacing the wood with metal around the rear door. Had fold down rear seats and some neat storage compartments. The family enjoyed it and we Drove it as a work in progress. Eventually I ended up with 3 different 37 Chevy Sedans so I decided which ever one sold I would use the money to finish the 37 Chopped Sedan which I still have.
    The delivery drew a lot of interest and ended up going to a guy in Indiana. We saw it in issue 39 of Rodders Digest and again at Columbus in 93. He had it looking really sharp.
    Lost track of it for a few years until my buddy who owned the plasma cutter spotted it at a show in California. The new owner was Marty Fisher. He had totally redone the car and was getting all kinds of attention including a spread in May 96 issue of Streetrodder. We talked a few times and I shared information and pictures of the build. He ended up buying the "Jimmy Hendricks Lives" side panels that I still had.
    The car was last seen for sale in Goodguys for 60K which was a little over budget for me to buy it back. Not sure where it is now.
     

    Attached Files:

  20. forty1fordpickup
    Joined: Aug 20, 2008
    Posts: 298

    forty1fordpickup
    Member

    This one is my favorite for road trips. Easy up and barbeques, it carries them no problem. Its always a fun time on the road or tours.
    [​IMG]
     
    Last edited: Feb 7, 2018
    Elcohaulic likes this.
  21. My 56 Pontiac.....Only decent pic I have...
     

    Attached Files:

  22. Tatorboy
    Joined: Dec 30, 2009
    Posts: 117

    Tatorboy
    Member

    Here's mine out working ;) Actually just pulled from a barn in Dec.
     

    Attached Files:

  23. hotrodgypsy
    Joined: May 10, 2011
    Posts: 282

    hotrodgypsy
    Member
    from reading,pa

    Here's my 48 chevy
     

    Attached Files:

  24. metal man
    Joined: Dec 4, 2005
    Posts: 2,955

    metal man
    Member

    raymay, I really like that with the glass installed in the sides. Kind of looks like a cross between a sedan and an old Suburban.

    Last summer, HAMBer -Booboo and I were out cruising around one night while we were camping at our favorite swap meet. We found this one laying alongside the road. It couldn't be bought,though.
     

    Attached Files:

  25. OahuEli
    Joined: Dec 27, 2008
    Posts: 5,243

    OahuEli
    Member
    from Hawaii

    Oh man, thats nice!
     
  26. Django
    Joined: Nov 15, 2002
    Posts: 10,198

    Django
    Member
    from Chicago

    Nice! More pics please?:cool:
     
  27. bonez
    Joined: Jul 16, 2007
    Posts: 3,487

    bonez
    Member
    from Slow lane

    Damn this thing is MEAN. dont mind the lights either....
    [​IMG]
     
  28. Tatorboy
    Joined: Dec 30, 2009
    Posts: 117

    Tatorboy
    Member

    As requested, here's a couple more, in color.
    IMG_2225.jpg

    IMG_2231.jpg
     
  29. Django
    Joined: Nov 15, 2002
    Posts: 10,198

    Django
    Member
    from Chicago

    That's killer. I'm partial to the black wheels and blackwalls though. ;) :D
     
  30. 24riverview
    Joined: Jan 13, 2008
    Posts: 1,052

    24riverview
    Member

    Bought this fine speciman in May, runs, "yard" drives (unless you plan on stopping), lots of rust but repairable, with title for $500. Last thing I needed but love the body style and wasn't gonna pass it up for that price.
    [​IMG]
    [​IMG]
     
    Last edited: Jan 16, 2013
    Elcohaulic likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.