Hot Rods Model T Visors - lets see em...

I did a Model A visor thread previously and figured there was a lot of cross over between A & T's so how about a look at what folks are doing for visors on their model T closed car builds.

Mine looks like this;

 

Stock as seen in my avatar pic.

 

This one is a an early A visor on a T coupe.

 

Here is one I just found on ebay.

 

here is mine

 

Always thought we would have had more replies and pic's for this thread.
Any more out there???

 

I need a visor for my '27 Sedan. When I get it, I'm gonna punch it full of louvers.

 

Stock T Coupe/Sedan and 28-29 A Pickup visors are a sheet metal frame covered with short/long grain top material. Try louvering that!

 

pasadena is right, I filled mine in with 16 gauge, pic in avatar, TR

 

We do need some good ideas so that we can get away from the original covered visors.
They might have worked OK at 20mph but not at todays highway speeds.

 

Here is a pic of my 26 I have a 30/31 model A visor that has been narrowed and then attacked by the hole saw!!!
Here is another pic, without the top

 

ttt

 

bump...

 

http://www.jalopyjournal.com/forum/showpost.php?p=2123965&postcount=30

 

Nice visor, should have attached the pic's here...

 

My latest T coupe visor, based on the style of a 28/29 model A closed car.

 

this avatar picture