****Valve Cover Picture Thread!****

Blue Thunder on a 429BBF

 

early Caddy on a 425 ci.

 

nice job. I never get tired of looking at this one

 

Here is my low buck Valve covers!!

 

wow

 

Those No Namers are actually Eelco's from what I've been told. I've got a set of the same with a matching valley pan.

The Liner is a 6-inarow from Tom. By far my favorite 235 valve cover.

 

Here is a set of early 60's y-block valve covers a buddie of mine did.

And here's the same engine with chrome valve covers with some " thunderbird special" decals

 

Here's some cal custom small block ford - painted with the fins sanded

 

Here is what will cover my valves .

 

"Imperial" covers on a 392 Hemi.

 

Here's a set of small block ford covers, falcon sprint for 1965.

 

1949 cadillac valve covers engine frozen.looks like never been taken off.

 

Thanks Tom. The new one Tom Lowe has developed for the gen 2 Chevy inlines is a real beauty. Kinda makes me want to look for a 292.

 

yum!:d

 

Hildebrandt "knuckle covers" for Cadillac

 

Yeah, but do they make one with fins?

 

You have to cut your own.

 

my covers that I think apply to cool-------409 w/drippers,and early olds, 2 styles and moon breathers. Gary

 

Early Caddy covers on a 78 425 cid.

 

Bill,
How did you mount your valve covers? Here's a set I built for my 500ci. I took an older set of valve covers, chopped them apart, and then welded them onto the tops of the 500ci covers

 

my O'brian hemi covers

 

Mine - FE 'Bird covers on a 5.0L. Gold painted for that 'Sixties Crate Motor" look. Ford-on-Ford - no fowl, in my opinion.

 

my Y block

 

Here are a couple pairs of mine. Hemi and 409.

 

This is an original CRAGAR valve cover that has had the fins and logos ground off then polished as was the style of the period. I do have a Roy Creel reproduction valve cover on the shelf. Note the neat brass hold down wing nuts.

 

I Think the Offy covers on my olds rocket fits in.

Sent from my DROID device using the TJJ mobile app

 

My De Paul Model T Ford OHV valve cover. Made from flat stock aluminium, and the help of a couple friends, one a welder, one an owner of a CNC.

Gary in MN

 

SOooooooo freakin Kool