Rubber tubing slicer

Some where I saw a home made device to slice rubber tubing straight so you can slip it over a metal edge.
Anybody have a picture or a referance to the making of such a device.
Thank you for your time.
Terry

 

You can use a 2x4 with a hole drilled in it and a razor blade sticking into the hole.

 

Boxcutter, Stanley knife set to depth and pull the line down it.

 

Stacy David dit a how to on his TV show.

 

If you're asking what I think you're asking a good way is to grab a 2x4, drill a hole a little bigger than the size of the hose, then cut the 2x4 in half right at the center of the hole. Stick it in your vise with a utility blade wedged between the wood so it only comes halfway up. then draw the hose through the hole..

 

Wow you guys are fast.

 

Dreddybear that is exactly what I needed.
Thanks HAMB!

 

I just made one it works great!