Register now to get rid of these ads!

Lambs 26 Tudor

Discussion in 'The Hokey Ass Message Board' started by Lamb, Oct 8, 2012.

  1. Lamb
    Joined: Jan 20, 2010
    Posts: 87

    Lamb
    Member

    Hey all, I was previously building a 28/29 A modified however plans changed - I wanted a roof as I probably wont build another rod straight after this one and want an all seasons car.

    Here's where I'm at with it (brief summary/recap)
    Driveline: '56 322 nailhead running a 3x2 2g setup, schiefer flywheel hooks up to offy bell and ford 4 speed top loader - back end is a '56 customline.
    Front suspension: socal drop axle, reverse eye spring behind axle, split bones ('37), armstrong lever shocks
    Rear suspension: ladder bars with bushed ends, standard A spring (but behind axle), telescopic shocks.
    Wheels are 15's - 15x5 and 15x7, final tyres will be stones (either 640-15 or 670-15 fronts and 820-15 rears).
    The chassis has a 4" sweep up front and a 10" at the rear, the exhaust will run through it and I will be running cowl steering and swing/hanging pedals.

    The body is due to rock up at the end of the month, I'm running a short wheel base because of the original modified plan and also I like the look so I will be shortening the T body a little to suit.
    I'm running a '29 A radiator surround and guide headlights. Inside will be a custom bench seat and a '49 ford dash.

    I'll be chasing a heap of 322 parts soon as I'm planning a rebuild if anyone can help out (keeping in mind I'm in the deep deep south)

    -Owen-

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. tfeverfred
    Joined: Nov 11, 2006
    Posts: 15,791

    tfeverfred
    Member Emeritus

    I like it. Sounds like it's going to be different. Keep chugging along.
     
  3. SniffnPaint
    Joined: May 22, 2008
    Posts: 434

    SniffnPaint
    Member

    Some cool parts. Now get to work!! Lol.
     
  4. TexasSpeed
    Joined: Nov 2, 2009
    Posts: 4,631

    TexasSpeed
    ALLIANCE MEMBER
    from Texas

    That'll be cool to see. I was subbed to your Modified thread so I'm definitely subbing to this one. Planning on chopping that top?
     

  5. HelmuthBrothers
    Joined: Oct 11, 2007
    Posts: 786

    HelmuthBrothers
    Member
    from New Jersey

    Love the chassis/stance. Big inspiration for my T roadster build.
     
  6. Lamb
    Joined: Jan 20, 2010
    Posts: 87

    Lamb
    Member

    Mr Mattitude - top will get chopped for sure, not sure exactly how much just yet. Plan is to shorten it to fit the wheelbase and then work the top out from there.

    thanks for the kind words everyone
     
  7. Gotta love a tall T. HRP
     
  8. MrGasser
    Joined: Oct 24, 2001
    Posts: 2,075

    MrGasser
    Member
    from DETROIT

    I'm diggin' the headlight mount, and the rear frame rails...
     
  9. fatkoop
    Joined: Nov 17, 2009
    Posts: 713

    fatkoop
    Member

    I really like the "reversed" dash!
     
  10. Lamb
    Joined: Jan 20, 2010
    Posts: 87

    Lamb
    Member

    here I was thinking all american dash setups were reversed!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.