Hot Rods 1934 Ford Sedan build pictures

ok thanks! your not hi-jacking it only helping me out!

 

picked up a 39 dash at the swapmeet on the weekend ....

 

hurst motor mount in.....

 

This is the height i had in mine might be to high?

 

put the heads and headers on it,should give ya a start,too high and the floor tunnel will be huge,no feet room,mine is lower in the chassis about 2 inches,but mine is also farther back,i made my firewall to fit multiple combos in case i decide to change to something else,big block,etc.,

 

The dash looks superb , I fitted a 61 galaxy dash in my coupe and I've got a 57 Belair dash for the sedan

 

Thanks, the dash turned out alright have a few more holes to fill in. The 57 dash would take alot of work!

 

I will try to dig some pics of my old coupe , I'm still collecting parts for my sedan but I start it in November .

 

got your picture's uploaded johnny

 

Here is one I liked from Napa, CA. Kevin did the chop and it looks good to me. I think it is 3 1/2 in the front and less in the rear.

 

Nice i have more pictures of that car

 

Nice car. Good luck with the build.

 

Thanks for that

 

This is my 3.5" chop

 

thanks !

nice chop rocky!

 

Your 34 is really looking nice beanhead. Looks like you are doing really nice work.

Kenny Baker out of Elmer, MO chopped the top on my 34 Sedan. He cut 2 1/2 inches out of the front and 2 inches out of the back. He lowered the rear window 2 inches, then took one inch out of the top of it since it looked so weird with such a larger back window.

Here is a link with more picts:

http://www.jalopyjournal.com/forum/showthread.php?t=200941

 

Just to give everyone a heads up Beanheadjr’s Vagina is swollen and he no longer has time to work on his car. A little advise remove the lace panties... Let me know when the swelling comes down and you’re able to act like a man again. LOL!!!

 

Those proportions look just right to me---beautiful

 

Need my Two Car garage !! lol (funny white boy)


Sent from my iPhone using TJJ

 

The car looks decent, but doesn't even looked chopped .


Sent from my iPhone using TJJ

 

Hood

 

Lowered the motor by 1". Now the oil pan is the same height from the ground as the front axle .

 

Yesterday I picked up my 3 deuce setup.


Posted from the TJJ App for iPhone & iPad

 

I end up with 1/2" clearance from the firewall .


Posted from the TJJ App for iPhone & iPad

 

lookin' good!

 

Thanks I need to keep at it!


Posted from the TJJ App for iPhone & iPad

 

Its about time you got back at it. Looking real good, very impressive bro. Give me a call if you need a hand.

P.S. Where did you steal that hood from, it looks mint.

 

Looking really fine , good to see you back at it


Posted from the TJJ App for iPhone & iPad

 

Looking good. What are you going to run for a fan? I have a similar motor swap coming up soon.