Anybody ever use two two barrels on a dual quad intake?

I picked up a dual quad intake for a sbc awhile back and was thinking of using it with 2 two barrel holleys I have both are 350 cfm and I'm using a 600 cfm Holley now . Just wondering if anybody has done this before and how well did it work or didn't it?

 

Like this?
Matt

 

Yes exactly how does it work for you ? Any helpfully tips ?

 

I really like it, other than not having the chokes hooked up. It's just a stock '76 350 so it doesn't make much HP. It runs nice and accelerates smoothly. I don't know if you can find adapters. I made my own and the air cleaner tops too.
Matt

 

I ran 2 Holleys on this Edmunds Dual Quad and it ran great.
If the engine has not been built up to run Dual Quad amounts of fuel then 2 Holleys should run fine on that manifold.





http://www.jalopyjournal.com/forum/...t.php?attachmentid=1722234&stc=1&d=1345770593

 

I'm pretty sure the adapters are available.

 

Yep I already have the adapters .

 

Any body else done this?


Posted from the TJJ App for iPhone & iPad

 

Yep- They work great. I run off the front one and the rear one kicks in about half throttle.