Here my current half project. Lol. It's a rear seat for a 53 bel air. Diamond tuck Bare bones. A lot easier to start this way Doing the lay out. Damn this is time consuming Finally all laid out time to sew Sent from my iPhone using TJJ
Here's a step by step of laying them out Step 1 cut material lol Step 2 lay out the height of each diamond Step 3 lay out the width of each diamond Step 4 find the center of each diamond top to bottom that's for each side point Sent from my iPhone using TJJ
Step 5 find the center point so you can find the points for top and bottom of each diamond Step 6 no line up and draw lines to start forming the diamond Step 7 finish drawing more lines to complete the diamonds. Now there are your diamonds!! Time to sew Sent from my iPhone using TJJ
VONRUBEN65, yes my GF and I recovered my stock ruined seats / trims etc in the diamonds last year. Our first interior, it's not perfect but looks good. The photos above were exactly how we did it.....having flashbacks to sewing huge panels of diamonds!
Getting ready for the back rest rebuild. This is the way I learned to do it others may have different ways though but here's mine Frame Put a piece across the top band to keep the gapping the same across the top Cover all the springs next up Now refoaming with a 1 inch thick piece Sent from my iPhone using TJJ
All trimmed up now to get the sides all sewn on This is gonna end up being the top band This is it for the night kinda hard to get much done watching a 3 year old and 1.5 ye old lol. Sent from my iPhone using TJJ
All done. Now I need a new project. It look crooked because it's just leaning against the garage Sent from my iPhone using TJJ
Thank u much!!! I should be starting. Motorcycle seat next week not sure if I should post it on here. Sent from my iPhone using TJJ