Register now to get rid of these ads!

Hey Shoutheast USA... Come race!

Discussion in 'The Hokey Ass Message Board' started by OldCarPilot, Jul 17, 2005.

  1. OldCarPilot
    Joined: Apr 1, 2003
    Posts: 1,292

    OldCarPilot
    Member
    from Bel Air MD

  2. Let me know who might come in on Friday night. I will be there. I think I will try to rope off an area at the 1/4 mile time lights for us. That way we can also have electricity. You can call me @ 478-955-4604 if you need me. I will have a tent up there my red aerosedan and maybe a grill..... Jimmy
     
  3. MetalFlaked60
    Joined: Oct 11, 2003
    Posts: 917

    MetalFlaked60
    Member


  4. popsrods
    Joined: Jan 19, 2005
    Posts: 112

    popsrods
    Member
    from macon,ga.

    hey jimmy , how is the swap meet going to work ? I am planning on coming over both days since i am in macon and am thinking about bringing some things to sell,you think that would work both days or just maybe saturday?
    pops
     
  5. MetalFlaked60
    Joined: Oct 11, 2003
    Posts: 917

    MetalFlaked60
    Member

    He said the swap will be just saturday....But we are gonna try to buy a bunch of chicken and cook it on the grill friday night...See ya there ...Jamie
     
  6. OldCarPilot
    Joined: Apr 1, 2003
    Posts: 1,292

    OldCarPilot
    Member
    from Bel Air MD

    I'll have to come down on Saturday as I need Friday to get my exhaust done. (I hope!)
     
  7. Have you found a place to do your pipes yet?
     

  8. OCP,
    what time are you heading down sat?????
    planning on sat too...
     
  9. MetalFlaked60
    Joined: Oct 11, 2003
    Posts: 917

    MetalFlaked60
    Member

    Are there any Hambers comin to the drags from fla going through Jacksonville. Or comin from Jacksonville....I have a 331 caddy motor down there i was gonna see if someone could pick it up...He will help load it...I have pinstriping I can trade....pm me if ya can help...I posted a new thread on this so more people would see it...can anyone help?...Jamie
     
  10. MetalFlaked60
    Joined: Oct 11, 2003
    Posts: 917

    MetalFlaked60
    Member

    I took these about 5 minutes ago....
     

    Attached Files:

  11. OldCarPilot
    Joined: Apr 1, 2003
    Posts: 1,292

    OldCarPilot
    Member
    from Bel Air MD

    Not yet... I had to get some new headers that won't be here until wed, and I can't get them on until Friday morning. You have a place in mind? I don't want to have to drive it open header for very far.
     
  12. OldCarPilot
    Joined: Apr 1, 2003
    Posts: 1,292

    OldCarPilot
    Member
    from Bel Air MD

    I'm open for any time. Morning time, but I don't care when... You?
     
  13. Antibilly
    Joined: Apr 6, 2002
    Posts: 3,487

    Antibilly
    Member

    Jimmy save me a outlet near you guys for saturday..... I have a hell of an extention cord so Id rather pull away a bit from the line but close enough to see it.
     
  14. Sounds like Josh is taking off at 8ish...(correct me Josh if i'm wrong) planning on heading out around then and hooking up. Safety in numbers
     
  15. I've got some 2 1/4 Mandrel bends and a sawzall at the shop if you don't mind getting a little dirty.
    Loud pipes on the connector (I-75/85) is probably not a real good idea though.
    Let me check with my local guys and see who they might recommend.
    There has to be a decent shop in or near Kennesaw.
     
  16. MetalFlaked60
    Joined: Oct 11, 2003
    Posts: 917

    MetalFlaked60
    Member

    if you want to bring it down here and get the pipes done go to Total Exhaust.. they are in warner robins and they are GOOD
     
  17. Yeah PBRmeASAP - Maybe a touch later like 9 or ten - I saw that they really don't run till 3. I'll probably be up and ready to run, maybe we can all meet below jonesboro somewhere and get breakfast. I need to get up with Hog mtn dave and see what time he wants to go. Sounds like Davancek is going to go with us too. He stopped by last night - very cool to meet ya Dave. He doesn't have a computer so he probably won't see this stuff.
     
  18. I'll be on the East side Friday night / Saturday.
    Want to hook up around Hamilton Mill someplace?
     
  19. Maybe we should all meet at Fuzzy's Saturday morning 9 AM

    Then we can blast down the highway

    I'm going to stop in Jonesboro to get Stealth C.
     
  20. OldCarPilot
    Joined: Apr 1, 2003
    Posts: 1,292

    OldCarPilot
    Member
    from Bel Air MD


    Meeting at Fuzzy's sounds good to me. A time?


    As for the exhaust I'd love to bring it down south and all, seems like everyone down there knows some shop that can help me out down there. But this car is LOUD!!! with open headers.
     
  21. I was thinking 9 9:30?? What do you all think - the uns don't start till 3 so....

    Maybe call Joe Smith and ask Josh Mills who a good muffler guy was there in Marietta?
     
  22. OldCarPilot
    Joined: Apr 1, 2003
    Posts: 1,292

    OldCarPilot
    Member
    from Bel Air MD

    That is fine with me. You'll NEVER hear me complain about being able to sleep in!!

    Josh and Jeff... Are you bringing the little ladies?
     
  23. Mine is not going -
     
  24. Trying to find a place to drop here daughter off....
    then she can come.

    9-9:30is is cool.
     
  25. It turns out I'm leaving from the shop on Saturday.
    Can I meet you guys at an exit on I-75?

    Who knows how to get to the track from the interstate?

    Looking forward to watching some Flatties and some FEDs run.
     
  26. Come on Mike, it's not that bad.

    did you find some that tuck up a little better so you can
    lower the car again?
     
  27. stealthcruiser
    Joined: Dec 24, 2002
    Posts: 3,748

    stealthcruiser
    Member


    EARPLUGS!
     
  28. don't forget the Johnny Paycheck Tape - somebody got a boom box?
     
  29. There's nothing wrong with a loud car....
    what are you guys talking about???
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.