Register now to get rid of these ads!

winter builds

Discussion in 'The Hokey Ass Message Board' started by wayneo856, Dec 29, 2011.

  1. wayneo856
    Joined: Jul 5, 2009
    Posts: 24

    wayneo856
    Member

    so what is everyone working on this winter?
     
  2. MT26
    Joined: Oct 7, 2011
    Posts: 174

    MT26
    Member
    1. Virginia HAMB(ers)

    been too cold in garage to do much so gonna work on the T parts inside until weather gets better.
     
  3. snelson57
    Joined: Jun 3, 2008
    Posts: 544

    snelson57
    Member

    Just picked up this 48 plymouth -

    No brakes - master cylinder needs rebuild.
    Has not run in 5 yrs - SBC /Auto should run
    Broken hood hinge / hood fitment issues. Will not latch.
    Too much gaudy crap all over it - toning it down a bit.

    If I can solve these issues and have it on the road in the spring with no heat in my WI shop, I will be happy.
     

    Attached Files:

  4. DirtyJoe
    Joined: Dec 1, 2011
    Posts: 268

    DirtyJoe
    Member

    Working on the A
     

  5. Midwest Rodder
    Joined: Dec 7, 2008
    Posts: 1,768

    Midwest Rodder
    Member

    Finishing up my 48 F-1 before spring gets here
     
  6. The weather has been much much much much better than normal here. Working on the avatar car, thinking about a build thread. Rustoleum red is the color of my garage floor..........
     
  7. dexleo2
    Joined: Jul 20, 2008
    Posts: 145

    dexleo2
    Member

    Been pretty good here for last couple weeks- got the motor and trans mocked up in the A, and got the rear end installed. Maybe by the time my Christmas vaccation is over I will have the floor installed.
     
  8. MedicCustoms
    Joined: Nov 24, 2008
    Posts: 1,094

    MedicCustoms
    Member

    I'm putting another motor in my 1926 T I'll post pics later.
     
  9. flathead okie
    Joined: May 22, 2005
    Posts: 1,480

    flathead okie
    Member

    Installing 32 tank on my Model A coupe. hope to have it done by New Year. Then working on other areas, steering, top, fenders, etc.,etc.,etc.:D:confused:
     
  10. gasolinescream
    Joined: Sep 7, 2010
    Posts: 614

    gasolinescream
    Member

    Nothing over wild getting done but the car and caravan are getting some love. Amazon is mainly getting a lowering, new rims and WW's and a tidy here and there. Would like to do alot more and have plans but all boils down to money and i'm currently not working.
    My caravan is due a little tidy, some hidden speakers and one of those small amps to run an i-pod through. Not fan of music in cars but the caravan needs it for when we go away to shows.
     
  11. outlaw256
    Joined: Jun 26, 2008
    Posts: 2,022

    outlaw256
    Member

    winter builds ? hell im still trying to finish last winter builds.lol funny, but true!
     
  12. Replacing the cab corners on a '49 AD pickup and putting the rest of the sheetmetal back in place (bed, front clip, etc.)
     

    Attached Files:

  13. JeffreyJames
    Joined: Jun 13, 2007
    Posts: 16,628

    JeffreyJames
    Member
    from SUGAR CITY

    I'm wrapping up a few loose ends on my '35 and then going to get started on my '33. No rush on the '33 but I have a ton of parts to get started so I'm expecting it not to take to terribly long. I'm really excited about it because as long as I've been into hot rods, I've wanted a wire wheeled, flathead powered early ford and this is going to be that car.
     
  14. Gotta do the front floor in the Belair. We are doing a engine swap, lowering and paint on my sons 62 Comet. My plate is full. Todd
     
  15. metalix_421
    Joined: Mar 24, 2010
    Posts: 890

    metalix_421
    Member

    trying to get the 56 olds on the road before lonestar round up
     
  16. denis4x4
    Joined: Apr 23, 2005
    Posts: 4,203

    denis4x4
    ALLIANCE MEMBER
    from Colorado

    '31 Model A frame, '75 Ford Courier 1.8 SOHC/4 speed, fiberglass deluxe sedan delivery body chopped top.
     

    Attached Files:

  17. rustrodder
    Joined: Nov 15, 2005
    Posts: 276

    rustrodder
    ALLIANCE MEMBER

    Finishing up my channelled open wheeled Model A coupe. Also updating steering, brakes and rear suspension on a poorly rodded '32 Chevy full-fendered coupe.
     
  18. Pat Pryor
    Joined: May 28, 2007
    Posts: 1,911

    Pat Pryor
    Member

  19. Bilt
    Joined: Jun 23, 2011
    Posts: 311

    Bilt
    Member

  20. SinisterCustom
    Joined: Feb 18, 2004
    Posts: 8,277

    SinisterCustom
    Member

    My '27 T and a '69 Super Bee....
    And a couple of front engine dragsters with some pals....
     
  21. the guys at the shop are building a 34 five window ford, and a 34 three window chevy.
     
  22. 56premiere
    Joined: Mar 8, 2011
    Posts: 1,445

    56premiere
    Member
    from oregon

    trying to get my 56 premiere in black.then red interior.been in the paint shop since april.but its smooooth.o and yesterday i got a 57 too.it 's black too.got it running and drove it last evening.both 2 doors.jack
     
  23. flatout65
    Joined: Dec 1, 2007
    Posts: 98

    flatout65
    Member
    from mid tenn

    tryin to get the body ready for the frame.... rust sux!!!!!!!!!!!!!

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    said frame
    [​IMG]
     
    richard price likes this.
  24. hudsonguy25@yahoo.com
    Joined: Mar 27, 2011
    Posts: 4

    [email protected]
    Member
    from alamogordo

    someday i will get my 25 hudson 2dr coach finished. has a 03 cobra 4.6 dohc supercharged with its 6 speed behind it.
     

    Attached Files:

  25. oldcarfart
    Joined: Apr 12, 2005
    Posts: 1,436

    oldcarfart
    Member

    my '53 AD forever project, '93 ranger turbo 4/ T-5 parts chaser, shelving for parts and selling on ebay and clist.
     
  26. BAD PENNY
    Joined: Aug 22, 2011
    Posts: 1,250

    BAD PENNY
    Member
    from mass

    There was already a thread on this about a month ago..."what's your winter project" if anybody cares ??
     
  27. A '65 dodge coronet 440, somewhere between a restoration and a super stock build.
     
  28. joburnsjo
    Joined: Oct 15, 2009
    Posts: 101

    joburnsjo
    Member

    I bought a new project for the winter 1969 chevelle SS
     

    Attached Files:

    Last edited: Dec 30, 2011
  29. amalgamated
    Joined: Jul 6, 2010
    Posts: 51

    amalgamated
    Member

    hope to start on this by the end of next month
     

    Attached Files:

    richard price likes this.
  30. rustednutz
    Joined: Nov 20, 2010
    Posts: 1,580

    rustednutz
    Member
    from tulsa, ok

    I just put the '31 A coupe project that I've been gathering parts for a couple of years into storage so I can concentrate on my '39 Olds coupe Gasser project this winter.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.