New gasser axle custom built by HAMB'er

The Speedway axle does not come with the spring perch welded on. Thats someone elses handy work.....

Nice work on the axles

 

It had lots of help

 

Very nice work!!

 

Wow, awesome work, Bill. This axle looks to be a monumentous upgrade over that other one.

 

Can you build a dropped axle or just straight?
Larry T

 

Just straight... I have looked in to it in the past and so far it cost way to much for a small batch of axles

Thank Bill

 

Bill makes it look easy. You should see his work in person. Pictures don't do him justice!

 

Um, I think I just found a new axle guy! I'll do straight but I can be added to the group interested in dropped. I'll PM you BIll.

 

To The Top.... for the guys that might need a up grade over the winter.
USA made 2" .250 wall moly and mild steel tubing in stock

 

that s some beautiful fabrication on the axle , its great to see someone take pride in a job well done ,

 

Bill looks to be doing some excellent fabrication with axles, and that's coming from someone whos owned most of the axles fabricated in the last ten years by people selling them. I'm going to get one this winter from him.....

 

Any movement as far as doing dropped units? Still looking for a 2" drop, 48" c/c, in CM with a .180+ wall thickness........

Or anybody have a source? Can't find anyone set up to bend CM in that wall thickness.

 

Is that red used axle from Speedway? WTF? Mister your axle/fab'n is BUILT to the hilt compared to that rickety junk. Go on and mass produce them!

 

Yes it was a speed way

But then a mad fabricator went to town with his bubble gum welder

 

WELL...I guess he CAN weld a little. My welds are smoother once the plastic sets up and I get em' all sanded and primed. Kidding, you must be air craft certified.

 

One of my latest axles went to stumpy142 here on the HAMB

I call it the dump truck axle its made with a 2.5 X .312 wall 4130 tube

 

Great photo to advertize your axle! I've seen the flaged axle ends Bill makes, great looking welds, he is a nice guy doing great work. Bob

 

The Speedway kit comes as U weld kit, lots of people use them and they are fine if welded properley, that one has been welded very poorly.

I make my axles the same way as Bill.

Lovely work Bill. proper professional.

 

Thanks Bob...

Here is a pic of the flag to help hold the king pin boss in.

 

Another axle being tested.
This one is a 2" .250 wall 4130 with a chunk of 1/2 flat stock stuffed down
The center then spot welded down the tube

 

...

 

Beautiful craftsmanship and engineering !

 

still going!!!!!

 

That's some damn good welding your doing. The welds on the old axle looks like it was hot steel dripped on there.

 

good look n axle right there

 

Yes... Made in the USA

King pin bosses


WACCUSTOMS.COM
Posted using the Full Custom H.A.M.B. App!

 

hi bill made my axle for my 55 chevy gasser.that one was chrome moly.next is my willy axle.it will be by him.

 

King pin bosses all flagged and welded into the ends. Next step hone and turn to fit the tube.


WACCUSTOMS.COM
Posted using the Full Custom H.A.M.B. App!

 

A shot from the other week.
Shock mounts welded on



WACCUSTOMS.COM
Posted using the Full Custom H.A.M.B. App!

 

Beautiful welds, quality craftsmanship, no worries running one of your axles...good stuff !!!