Hot Rods 32 ford frame horns

Does anyone make after market frame horns? I need some for a build or anyone have a set for sell?

 

How far back from the center fo the front bumper hole? I may have some on the shelf, otherwise we can build them but we are way behind right now.

 

Chassis builder. I built my frame from 2x4 tubing and tryed to memic a model a frame. I don't like the look and can graft just about anything to it. What do you have on the shelf and how much?

 

If I still have them on the shelf I would take 75 bucks, but they are only maybe 10" long. The style I make for grafting to 2x3 or 2x4 run quite a bit more becasue they are about 3 foot long and quite a bit of labor.

 

If this deal don't work out, Kugel Komponents used to sell them I bought a pair back years ago.

 

Just make them All you need is someones frame,Make template ........

 

Yep, if I had access to a frame I would build them. You have a template?

 

Nope but Ill see what I can do Ill trace mine on sheet paper If you need them,John

 

ASC has them

http://ascrails.com/1932_prices.html

front 29 inches are $165 for a matching pair
front 49 inches are $245 for the pair

 

Use Model a frame horns. Much better looking and cheap!

 

HOTRODDORK gave me a set (I just paid for shipping) and decided not to use them. If you want them just pay for shipping. PM me your name and address. Only problem is that it's missing 2" from the front and 1.5" to the front crossmember but I can give you a template off my other frame.