decided to finally post some pix of my 32 3 window

All my pics. were lost there are a few on page 6 I put back on will try to reload when I get time. Thanks

well I don't post much in the general discussion just a lurker for the most part here but thought I would finally post some pix of my 3 window 95 % original patina and threw some of the rarest parts I could find on it, has been a blast to drive this year finally! This 'ol gal will never get painted as long as I own it. Body has never been messed with.No patch panels,chopped,or filled.
Chassis was built in early 60's with juice brakes,hurst mount,SB adapter to the 32 tranny, has a 1956 265 motor I added a rare one of a kind 4x2 setup built in the 60's by Bill Wanderer has all gear driven linkage just a trick setup,chicago streamlite rims, lots of old chrome suspension and interior mouldings and dash,SW wing gauges and ect...........
long story basically on it but heres the result
I am not fast at getting pix to load up so check back




more to come

 

Very nice, don't change a thing!!!!!

I like your fuel bowser too!!


Waz.

 

some more

 

Nice. Now go for a ride!

 

I would love to have that car just like it is, an drive the wheels off of it.

 

i joke about everyone and there mother having a 32 in jest.. with that said.. i really like your car.. to me it just screams cool.. little warn around the edges.. just like me.. drive the piss out of her and enjoy your days.. they go fast. rock on.
chris.

 

VERY VERY nice,

 

awesome.

 

She's a beaut Russ!

 

interior all chrome mouldings and dash original top insert


old moon drop and a old bakelight cigarette dispencer

 

I would start smoking again if I had that! Too cool.

 

ooh louvers too, even better!!

 

wow, iv never seen a original roof.. never knew they used what looks like chicken wire.. and the moon drop is way cool.. i do not s moke cigs so id have to load the dispenser up with some green stuff :d

chris.

 

I love it...don't change a thing!

can you share a pic of how that hood top is secured?

 

KILLER deuce. Drive the tires off of 'er.

That's what Life is all about.

VR&C.

 

Perfect.

 

Had the old Heddman headers on yet when I bought the chassis added the pipes which are old tapered driveshafts and had chromed after running for awhile look like they belong now. quarter behind pass door you see is only rust on body besides couple small holes in floor!

 

Chrome Headmens......rad.

 

a generator instead of an alternator, good to see, very traditional!

 

Thanks for posting those pictures,.. I really dig your Deuce !

 

I love the car,the only thing I dont like is the fuel lines between the distribution block and the carbs

Gary

 

greaser, pretty simple hood latch I did not want straps or any outside fastener showing so just lined the 2 front and back inner hinge part with brass for ease of sliding, welded a washer on back side of second hinge area a spring is used between the washer and 1/4" rod used to make it spring loaded made a bracket off rad shell and drilled a hole in cowl area to secure. could be made a lot better looking than mine but made mine to fit the build.

 

Thats cool...can I steal your design?? I love the simplicity, and I really dislike those straps.
Thanks for the pics,
Dennis

 

Damn what a cool hot rod!

 

Fantastic rod. I'm drooling.

 

dope

 

It doesn't get any better than this. Take lots of pictures.

 

that coupe is just bitchin.

 

Love them 3-windows...awesome looking ride man !!! Maybe I'll tear the fenders off mine. Gotta re-do the front end 1st though.

 

Wow! Bitchin car. I LOVE all of the old plating. Now you need to find some wheels with old plating...

Neal