VanGo steering setup?

i have searched everywhere for pictures of how Church setup the steering on VanGo (i have PM'd him as well) i know that it uses a mustang II front clip but other then that there is no info that i can find. anyone have any pictures or ideas of how everything is tied together?

 

My guess is the rack was rotated forward, with a few u-joints.

Pretty sure there was pics here.

 

check with Tim Conder, he did a bunch of the work.

 

Your better off reaching Coby through CHURCH magazine website.

 

Here you go. I got these off another thread on the HAMB.

 

thanks, which thread was that? i spent a good 20 mins combing the various VanGo threads on here

 

Well there you go......Next question.....

 

I think it was the Econoline thread.

 

http://www.jalopyjournal.com/forum/showthread.php?t=604124&showall=1

 

Haward Kay "CHUBBY CHASSIS" getting ready to do one for my 61. did a Econo p/u for Gene Winfeild a while back.


PM me for his cell # if interested.

 

i noticed that he used a single sided steer clear. can you just flip the output on those so the output is the same side as the input or was this a custom built piece?

 

i contacted Wizard Fabrication (the maker of steer clear) and they said that all of their units can be assembled with the output and input on the same side. you just need to let them know when you order your unit.