Projects kool wheels for 122 volvo

need ideas for my volvo 122
has 5x4.5 bolt pattern
the smallest i can run is 15" and about 6" wide
with a 3.25-3.75 back spaceing

 

Not sure what you're after. If it's steelies, then '65-'70 or so Ford station wagon wheels are 15x6". Mopar wheels should work, like those on B and C body cars. Older AMC wheels were usually narrower.

No idea of backspacing. Center hole sizes differ too. I used to use 15x4.5" Studebaker wheels on mine without any sort of problems.

Up to around '64 Volvo used nice looking steelies, but only 15x4". The centers from those could be used to build some wider wheels with the proper backspacing, but it would involve a wheel shop and bucks.

Good luck, hope you find a good solution to this dealie.

 

How about a set of these?
http://www.blueovalranch.com/content/1965_1967_mustang_styled_steel_chrome_wheels/

Backspacing in 15x6" is too much, however.

 

mini lites they sell on ipd for my car but there like 200 dollars im trying to find some for cheep

 

92-97 crown vic steelies i believe are 15x6 and they almost look like a smoothie wheel. i got my from the boneyard for 20 a piece. thats cheap! blasted them and painted 'em cream. they look stellar now.

 

I meen the best lokking wheels for 121-122-123 is wiedend original rims, here is a picture of mine 8"

 

thoes look pretty sweet

 

The Estate(wagon) has 4.5 " wide wheels. only .5 more but an option.
Not sure if they fit but I set some Mopar police wheels next to our parts car just for kicks.
Wife picked out a color for powdercoating on the 4.5" wheels.

 

I have run 15x6 torque trusts 15x7 slotmags widened stock wheels 6-7-8 inch
15x6 cragar ss 15x7 keystone clasics, stock ford 15x6 steelies 15x6 crome reverse
(a bit to wide) and many other combinations on my Amazones throught the years
owned about 20 of them

 

Once a friend of a friend had Mopar Rallye Wheels...