I was able to recently buy some really cool 6 pin drive wheels. At first I thought of plugging and re-drilling them for 5 on 5-1/2 pattern. But as I think about it how hard is it to come by a 6 pin drive QC and knock offs for these wheels? Also what will I need? Thank you, Tim
a hub with 6 pins with a treaded snout of 2.5 or 2 5/8 ...pressure plate for the wheel or (dose it have a built in pressure plate) and a knock off
Most all 6 pin QCs are for sprints/midgets with a one piece open axle and no diff. If thats what you want, there's plenty to be found. If you want 2 axles and a diff., there probably going to have wide 5 or 5x5 hubs.