Wondering what you guys out there think of Torchmate and their machines. I have been seriously considering a purchase soon as was seeing what sort of experiences anyone has had with them.... I would mostly use it for small stuff nothing too big but I figure 2x4 would be plenty for most stuff for rods and such.
I would think 4 x 4 would be as small as I would go, as it makes for nesting parts easier, and you can cut firewalls in one piece. I built my own, but have heard very good feedback about Torchmate. Just my 2c
I would think 4 x 4 would be as small as I would go, as it makes for nesting parts easier, and you can cut firewalls in one piece. I built my own, but have heard very good feedback about Torchmate. Just my 2c