Register now to get rid of these ads!

know anything about X-frame chevys?

Discussion in 'The Hokey Ass Message Board' started by cutlass_supreme71, Feb 19, 2011.

  1. cutlass_supreme71
    Joined: Feb 19, 2011
    Posts: 27

    cutlass_supreme71
    Member

    I have a '58 brookwood wagon. I'm pretty sure, but not completely sure that the chassis from any 58 (except the convertible) will fit it. Is this correct? Heck for that matter any x-frame '58-'64 should fit it... again except the convertible... right?

    thanks
    shane
     
  2. texoutsider
    Joined: Jul 6, 2005
    Posts: 826

    texoutsider
    Member
    from Frisco, Tx

    58-64 should work ...check the wheelbase on your wagon. I just spent a few days repairing an x frame 62 for a friend. We should have found another...dam thing was rusted to hell and back.
    M.
     
  3. cutlass_supreme71
    Joined: Feb 19, 2011
    Posts: 27

    cutlass_supreme71
    Member

    Good deal I thought so. I'm hoping the parts car I used to know of is still there... I had a good frame under it... a rolling chassis as it were. which is more then I can say for my wagon.
     
  4. Lone Star Mopar
    Joined: Nov 2, 2005
    Posts: 3,845

    Lone Star Mopar
    Member

    You should send a pm to Ryno here, he has a 59 or 59 brockwood wagon (I believe) that he's done a pretty nice build thread on. Perhaps he has some info he could share with ya.
     

  5. poncho62
    Joined: Nov 23, 2005
    Posts: 1,094

    poncho62
    BANNED

    Dont quote me on it, but I think that there were some changes in 59 to improve some aspects of the frame......and that 58 was kind of an oddball
     
  6. Rudebaker
    Joined: Sep 14, 2007
    Posts: 1,598

    Rudebaker
    Member
    from Illinois


    I believe you are correct and the wagon frames were slightly different behind the rear axle IIRC. Been a few decades since I was under one though.
     
  7. oldolds
    Joined: Oct 18, 2010
    Posts: 3,408

    oldolds
    Member

    Hollander #830 1958 Chevrolet pass. except convertible.
    #831 1958 Chevrolet pass. convertible
    Dosen't matter 2 door, 4 door, hardtop,sedan, or wagon.
     
  8. bbc 1957 gasser
    Joined: Aug 3, 2007
    Posts: 683

    bbc 1957 gasser
    Member

    we tried to put a 58 frame under a 64 chevy it didn't work they are diffrent
     
  9. maniac
    Joined: Jul 11, 2005
    Posts: 539

    maniac
    Member

    58 had kind of a one off rear suspension, was different that the 59-64 Chevys
     
  10. HEATHEN
    Joined: Nov 22, 2005
    Posts: 8,593

    HEATHEN
    Member
    from SIDNEY, NY

    Right, in '58 they used a horseshoe shaped upper control arm.
     
  11. 64gtoguy
    Joined: Aug 22, 2008
    Posts: 277

    64gtoguy
    Member

    The upper arm on my 60 El Camino has a pretty substantial curve on it. Thst's sbout all I can tell you.
     
  12. The '58 chassis are a single year only item. The '59-64 will not interchange due to the difference in wheelbase.

    Follow what was posted by "oldolds" above.
     
  13. cutlass_supreme71
    Joined: Feb 19, 2011
    Posts: 27

    cutlass_supreme71
    Member

    thanks guys you're awesome.
     
  14. 58fed
    Joined: Jul 11, 2008
    Posts: 262

    58fed
    BANNED

    The convertible frames aren't that much different and I'm pretty sure even they could be used under the wagon. I'm working on two converts and a Hard top for a customer right now. He has two wagons out back, unfortunately, they are buried in snow. If you have any questions feel free to PM me.
     
  15. dalesdeadbug
    Joined: Oct 28, 2010
    Posts: 36

    dalesdeadbug
    Member
    from cincinnati

    for what its worth i have a 63 frame laying around that i dont need if anyone may be interested in it
     
  16. cutlass_supreme71
    Joined: Feb 19, 2011
    Posts: 27

    cutlass_supreme71
    Member

    appreciate it, but I think I'm going to find a good 58 parts car. I have a couple leads here in oklahoma.
     
  17. cutlass_supreme71
    Joined: Feb 19, 2011
    Posts: 27

    cutlass_supreme71
    Member

    hhhhmmmmm build thread coming soon!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.